Operation Manual

57
Problem Possible Reasons Solution
No Signal
1. Input source is no set up
properly.
2. Incorrect video output
system.
3. Current input source is not
compatible to selected source
signal.
1. Setup the input source
correctly.
2. Change to another video
output system.
3. Choose a suitable input
source.
Timer Recording not possible
1. The disc does not reach
requirements.
2. Incorrect time settings
(system time or recording time).
3. The input source does not
work properly during recording.
4. Power failure.
1. Ersetzen Sie die Disk durch
eine neue DVD+R oder
DVD+RW Disk.
2. Stellen Sie die Zeit neu ein.
3. Make sure that the input
source is working properly
during recording.
4. Change the unit into standby
mode.
Recording was interrupted
1. No free disc space available.
2. Low disc quality.
1. Change to an empty disc.
2. Change to a disc of higher
quality.
Troubleshootin
g