Operation Manual

Internet
Radio
IRW850
Use
r
M
anual
Power Mgmt Configure to go to standby mode automacally during in the menu or/ and
without Wifi signal.Choose the power management mer ( 5/15/30mins) to set
the duraon of the radio to switch standby mode automacally when you are
not controlling it.Choose Turn off to ignore the power management
funcon.
Sleep Timer Turn off or set the sleep mer of 15/30/60/90/120/150/180 minutes.Once the
me is set,there will be a bed icon with remaining minutes at the top right
corner and the device will turn to standby then .Press Sleep on the remote
control for the shortcut of this funcon.
Buffer
Configure the buffe
r me of the music playback,2/4/8 seconds.
Weather Acvate/deacvate the weather forecast for the standby display.Choose your
preferred temperature unit (℉ or ℃) and then proceed entering your locaon.
When acvated, the weather forecast is shown in turns with the clock display
on the standby screen (each 10 secs).
Local Radio Setup There is a shortcut Local Radio under Internet Radio so that you can easily go to
the staon list of your locaon.You may Manual Setup your locaon, or let the
system Auto Detect your current locaon.The system detects the locaon
according to the IP address
of your connected netw
ork. Press Local Staon to
enter this local radio list directly.
Playback Setup Select the playback mode of media center-Off ( no repeat or shuffle),Repeat all,
Repeat one,or Shuffle.
Device Default device name for DLNA is “AirMusic”.You may rename it for DLNA setup
on the PC or mobile.QR code for downlode and install “AirMusic” control App.
Equalizer Default equalizer is Normal, you may change to Flat, Jazz, Rock, Soundtracks,
Classical, Pop, or News.Press EQ on the remote control to swap among the EQ
mode for shortcut.
Resume When Power On The system is default to resum
e
internet radio playback if you were
listening to internet radio or media center before switch off the unit.If turn this
seng off, the system will remain in the main menu when switching on the unit.
Soware Update Update soware. If there is an updated soware version on the server,the
system will
nofy you .Before starng a soware upgrade,ensure that the unit
is plugged into a stable mains power connecon.Disconnected power during a
soware update may permanently damage the unit.