Operation Manual

EN
7.2.2-DNR (Noise reduction)
You may reduce interference and noise
formed in the picture by using this feature.
Select DNR tab in the Picture menu with the
Up/Down movement buttons to activate this
feature and select one of the OFF, LOW,
MID, HIGH or AUTO options with Left/
Right movement buttons.
7.2.3-Color Temperature
You can adjust the color temperature with
this feature. Move to the Color Temperature
tab in the Picture menu by pressing the
up/down movement buttons and select
WARM, COOL or NORMAL by pressing
the right/left movement buttons.
7.2.4-Tint
When NTSC video is input via Scart, you
may make Hue settings. The tint option is
not seen in the menu when you have not
input this type of a video. When a NTSC
video is connected via the Scart, this option
becomes active and it is available in the
menu.
7.2.5-Active Contrast (Optional)
This feature allows making brightness
settings according to the picture. A brighter
or dimmer picture can be sent to the screen
according to the brightness level of the
picture. Thus, a wider effect is obtained in
terms of contrast.
7.2.6-Backlight
With this feature, you can adjust the intensity
of light reflected to the LCD Panel. Select
Backlight by pressing the Up/Down
movement buttons and adjust the desired
level by pressing the right/left movement
buttons.
Note: If your TV is equipped with Active
Contrast feature and this feature is set to
On, then Backlight tab is not displayed in the
menu.
7.2.7-MPEG NR
You may remove the artifacts that
appear in the picture as square shaped
blocksbyusingthisfeatureexceptin
the Tuner mode.Select Mpeg NR tab
from the Picture menu with the Up/Down
movement buttons to activate this feature
and select one of the OFF, LOW, MID or
HIGH options with Right/Left movement
buttons.
Note:MPEG NR feature appears in the menu
for all sources except the Tuner mode.
7.2.8-Picture Smart
You can select either one of the
three non-adjustable settings in the
memory or one of the user options
by pressing the “(
)“ button on
your remote control. SOFT, NATURAL,
RICH are default values; USER represents
the values you stored in memory.
7.2.9-Picture Format
With this option, you can view the
broadcast you watch in a format
of your choice. You may view
broadcastings in either AUTO,
16:9, 14:9, 4:3, LETTERBOX, SUBTITLE
or PANORAMA formats. 16:9, 14:9 or 4:3
formats can be selected in PC modes. In
that case, the name of the selected picture
format will be displayed in the centre of the
screen.
Note:InPCMode,4:3,16:9and14:9
pictureformatsaresupportedin16:9
panels.Only4:3pictureformatissupported
in4:3panels.
7.2.9.1-Auto
Some movie channels may broadcast in
the16:9format.Ifyouwouldliketoseethis
format automatically, then select AUTO.
In that case, AUTO 16:9 appears on your
screen.
19 I