User Manual
Thank you for buying our Wi-Fi DV. Before start using this product, please read this manual carefully to maximize its performance and extend the life of the product.
1. Shutter button 8. Micro USB port 2. Microphone 3. LCD display 10. Micro SD card slot 4. Lens 11. External microphone 5. Wi-Fi switch and status indicator (red) 12. Battery cover push switch 6. Power / Mode button 7. Infrared signal reception light 9. Micro HDMI port 13.
LCD Display Illustration Turn on the Wi-Fi DV, the LCD will display the following status and settings: 1. Camera mode 2. Video recording mode (default) 3. Wi-Fi icon (display when enabled) 4. TF card icon (display when loaded) 5.
In camera mode, HI stands for 8 Mega Pixels (3264x2448), and in video recording mode, it stands for FHD (1920x1080,30fps); In camera mode, LO stands for 5 Mega Pixels (2592x1920), and in video recording mode, it stands for 720P (1280x720,30fps); HILO only displays in video recording mode, standing for 720P (1280x720,60fps). 6. Mute mode, displays when enabled, and disabled by default. 7. Counter, displays up to 999. 8. Timer, displays hours and minutes. 9. Battery icon: current battery level of the camera.
Video preview mode (1080P default) Video mode (720P,30fps) Camera mode (8MP) 5 Video mode (720P ,60fps) Camera mode (5MP)
In video mode, press the Shutter button to start recording, LED flash,and press it again to stop; In camera mode, press the Shutter button to take photo. Use your Wi-Fi DV When you use the DV for the first time,please: 1. Insert a micro SD or micro SDHC card, as shown in the following picture.
High speed card at least Class 4 is recommended; When using time delay function or recording video in professional mode, the card of Class 10 is required. Turn off the DV before inserting or removing the card. 2. Use the battery 2.1 Install the battery. Please install the lithium battery correctly as shown in the following graphic.
Step 1. Push the battery cover switch to the lock position( ), and remove the battery cover. As shown in figure 1. Step 2. Put the lithium battery into the battery slot. Make sure the electrodes of the battery are corresponding to the symbols of the DV shell( ). As shown in figure 2 and figure 3. Step 3. Install the battery cover back in place, and lock the switch to the lock position( )to fix the battery. As shown in figure 4. 2.2 Charging the battery.
USB cable to charge the battery. During charging, the status indicator (blue) will light on,and the indicator off when charging completes. Note: When the DV is on, connecting it to the PC will not charge. Turn on/off 1. Turn on: press and hold the button for about 3 seconds, LCD displays “ON” and a beep can be heard from buzzer.
2. Turn off: press and hold the button for about 3 seconds, LCD displays “OFF” and a beep can be heard from buzzer.
Note: The DV will turn off automatically if it is idle for 5 minutes.
HI Video recording mode icon The DV is in video recording mode. Video resolution FHD: 1080p@30fps Recording time Stands for 0 hour and 00 minute. TF card icon Display when a TF card is inserted, otherwise no display.
Battery level Battery is full Mute icon The DV is in Mute mode, no Beep will be heard when pressing the buttons. It displays only when Mute mode is activated. Wi-Fi icon Display when activated. Shooting modes. The DV provides different shooting modes. Press the button repeatedly, the following first two modes will show on the DV screen , and other models display on the APP operation.
HI stands for FHD (1920x1080,30 fps) video Video Lo stands for 720P (1280x720,30 fps) video HILO stands for 720P (1280x720,60 fps) video Photo HI stands for 8M (3264 x 2448) resolution Lo stands for 5M (2592 x 1920) resolution Continuous shot The DV supports taking 3 photos continuously (only via App) Self-timer In self-timer mode , you can set 0s, 2s or 10s (only via App) 14
1. Video To record a video, please check whether the DV is under Video mode. If the icon displayed on the screen, press the is not button repeatedly until it appears. Start recording: Press and release the button, the icon and [:] displayed in LCD will flash. At the same time the red indicator will flash too, meaning the recording is in process. Stop recording: Press and release the button, the icon and [:] displayed in LCD will stop flashing.
is stopped. When the TF card is full, or the battery runs out, the recording will stop automatically, and the recorded video will be saved before the DV turns off. 2. Photo To take a photo, please check whether the DV is under Camera mode. If the icon displayed on the screen, press the Press and release the is not button repeatedly until it appears. button, a beep will be heard and the red indicator will flash, meaning a photo is taken.
The Wi-Fi is disabled by default. Press the Wi-Fi button on the side of the DV to enable it. When starting connecting to Wi-Fi network, the indicator will flash, and when a Wi-Fi network is connected, the indicator will remain on, and the Wi-Fi icon will display on LCD screen.
4. Enable/disable Mute mode The buzzer is enabled by default. Under the Video or Photo mode, press and hold the Shutter button to disable the buzzer and indicator to enter Mute mode. Under Mute mode, the icon will display on the screen; press and hold the Shutter button again to exit Mute mode.
5. Connecting to HDTV 5.
Note:Before connecting or removing the HDMI cable, please stop video recording, playback and disconnect Wi-Fi first. 5.
S/N Icon name Description 1 Playback mode Under Playback mode currently. 2 File number There are 31 files and you are viewing the 19th one. 3 Video icon The file is a video. In Playback mode, press the Power button to switch between photos and videos.When there are several photos or videos, press the Wi-Fi button When a video file is selected, press the Shutter button button again to stop playing. 21 to select the photo or video.
In Playback mode, press and hold the Shutter button , a prompt of deleting the file or formatting will appear. Press the Wi-Fi button to switch between deleting or formatting,then Press the Power button button to select Yes or No, and press the Shutter to confirm and exit.
6. Connecting to PC 6.1 Turn on the DV and connect it to the USB port of the PC via the attached USB cable. The DV will enter U-disk mode and the LCD will display as below after connection: Now you can view the photos or videos taken by DV on PC.
6.2 In U-disk mode (PCU mode), press the Shutter button to switch to web cam mode (PCC mode), and the LCD will display as below: Now you can start the web cam through application. To return to U-disk mode (PCU mode), press the button again. Note:Driver is not required for web cam mode (PCC mode) on Windows XP(SP3) version or above.
Remote Controller Application Buttons Signal emission port Power off button Photo button Video button 25
Instruction You can use the remote controller to record videos, take photos and shut down the DV. When using the remote controller, aim the signal emission port to the infrared signal reception light of the DV, and press the video button, photo button or power off button.
APP (support Android and iOS) 1. How to install an APP 1.1 Search for ”SYMAGIX” in Google Play (for Android OS),or scan the QR code printed on the gift box to find the APP and install it according to the instruction. 1.2 Search for ”SYMAGIX” in APP Store (for iOS) or scan the QR code printed on the gift box to find the APP and install it according to the instruction.
2. Android APP 2.1 Install SYMAGIX APP (provided by dealer or via internet) on Android phone or tablet. When installation completes, the LCD will display icon . 2.2 Insert the TF card and turn on the DV, then press the Wi-Fi button to enable it. Now you can see the Wi-Fi icon on the LCD. 2.3 Enable Wi-Fi on Android phone or tablet and search for wireless AP signal SALORAPSC5300FW _WIFI, then connect it to DV, until the system displays “Connected successfully”.
2.4 Click the icon in the App list of the Android phone or tablet to open it. Now you can preview the image sent by the DV on the phone or tablet and start some operating. The operation interface on terminal is shown in the following figure.
1. Video resolution 6. Photo mode 2. White balance 7. Video mode 3. Setup (enter setup menu) 8. Wi-Fi signal icon 4. Enter Playback mode 9. DV battery icon 5. Shutter button 3. iOS APP 3.1 Install SYMAGIX APP (provided by dealer or via internet) on iOS phone or tablet.
installation completes, the LCD will display icon . 3.2 Insert the TF card and turn on the DV, then press the Wi-Fi button to enable it. Now you can see the Wi-Fi icon on the LCD. 3.3 Enable Wi-Fi on iOS phone or tablet and search for wireless AP signal SALORAPSC5300FW _WIFI, then connect it to DV, until the system displays “Connected successfully”. 3.4 Click the icon in the App list of the iOS phone or tablet to open it.
1.DV battery icon 2. Video resolution 3. White balance 4. Setup (enter setup menu) 5. Enter Playback mode 6. Shutter button 7. Photo mode 8.
Note: 1. A TF card must be inserted if you need to take a photo, record a video, or download files on the terminal; 2. The Wi-Fi indicator will remain on when the terminal is connected to DV.