Instructions / Assembly

18” Wide Standard Lockers – 18-54000 Series
Four Tier Installation Instructions
Phone: [phone] Int’l Phone: [phone]
Fax: [phone] Int’l Fax: [phone]
www.lockers.com [e-mail]
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2017 Salsbury Industries. All rights reserved. Page 5 of 5 (10/25/17)
SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Front Base Installation (Optional)
Position the front base between the front legs of the locker with the flange upward.
Assemble to the locker with #10 - 24 x 3/8” slot less screws and #10 nuts (provided).
End Base Installation (Optional)
Position the appropriate end base (right or left) behind the corresponding side legs
(right or left) of the locker with the flange upward. Assemble to the locker with #10 - 24
x 3/8” slot less screws and #10 nuts (provided). Repeat for the other side.