inst horizontals rear

4B+ Horizontal Mailboxes – 3600 Series
REAR LOADING Installation Instructions
Installation of Identification Window
Identification labels, clear plastic windows, and metal
window backup plates are provided, separately bagged,
for use in marking the user’s identity on each mailbox
door. The steps below are numbered according to the
picture to the right.
1. Mark the user’s name or other appropriate identity on
one of the ½” x 2” labels provided. Tear the label from
the card.
2. Insert the label into the clear plastic window so that the
marking will be visible from the front of the mailbox door.
3. Place the clear plastic window into the rectangular hole
in the door so that the identity is visible from the front of
the door.
4. Slide metal window backup plate down into grooves at
top of door. Slide plate down until it covers the plastic
window and the bent lip of the plate rests on the top edge
of the plastic window. At this point the identification
installation is complete.
SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Ph: 1-800-624-5269 Int’l Ph: 323-846-6700
Fx: 1-800-624-5299 Int’l Fx:
323-846-6800
www.mailboxes.com [e-mail]
2
3
4
1
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2009 Salsbury Industries. All rights reserved. (Rev. 07, 4/1/2009)