Installation Guide

SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Phone: 1-800-624-5269 Int’l Phone: 323-846-6700
Fax: 1-800-624-5299 Int’l Fax: 323-846-6800
Modern Mailboxes – 4150
Surface Mounted Installation Instructions
Made of sand-cast aluminum with a durable powder coat finish and a heavy-duty sand-cast brass mail flap, Salsbury 4150 modern mailboxes will
provide years of maintenance free service.
Mounting the Modern Mailbox to a Flat Wall
1. The installation fasteners are not provided due to the variation in
wall types to which the mailbox might be mounted. Select fasteners
and anchors appropriate for the type of wall.
2. Mounting access is provided by opening the mail flap and mail
access door.
3. Where possible, it is best to shield the mailbox from direct
weather conditions.
4. Contact your local U.S.P.S. office for the required height of the
mailbox on the wall.
5. For convenience and security, the mounting holes are double key-
holes. See illustration.
6. Holding the mailbox aligned horizontally in the mounting position,
mark on the wall the position of the two upper mounting holes in the
back wall of the mailbox.
7. Install the two top fasteners and hang the mailbox loosely on
them.
8. Mark on the wall the position of the lower ends of the two lower
key-holes.
9. Remove the mailbox and install the two lower fasteners.
10. Remove the lower fasteners, hang the mailbox on the wall,
reinstall the two lower fasteners, and securely tighten all four
fasteners.
Cleaning
Interior & Painted Exterior – Using a soft cloth or sponge, clean the
interior and painted exterior of the mailbox with liquid soap,
detergent, or diluted water-soluble household cleaners. Completely
remove residue of any cleaning products with water, and thoroughly
dry with a clean cloth or paper towel.
Cast Brass Mail Flap – The mail flap may be cleaned as indicated
above. DO NOT
use abrasive materials on polished cast brass
surfaces.
4150 Modern Mailbox
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2006 Salsbury Industries. All rights reserved.

Summary of content (1 pages)