Installation Guide

Roadside Mailboxes - 4325
Wall or Column Mounted Installation Instructions
U.S.P.S. APPROVED
Thank you for selecting Salsbury’s 4325 aluminum roadside mailbox. We are confident that the quality and construction of this product will provide
years of maintenance free use.
Model 4325 Roadside Mailbox
Installing Roadside Mailbox in a Wall or Column
This instruction sheet is for installing the 4325 roadside mailbox in a
hole in a wall or column. Other installation instructions are available
for installing the mailbox direct to a pedestal, on a 2-wide spreader,
on a 3-wide spreader, on a deluxe post, or on a post in a concrete
footer.
It is recommended to have the unit present before starting the wall or
column construction to obtain the best possible installation. The
rough opening should be sized approximately 1/2” larger that the
outside dimensions of the unit.
Due to construction variations and method of fastening the unit in the
installation, the fastening hardware is not included. Choose
fasteners that are appropriate for the construction method.
USPS Regulations
It is important to note that it is not the responsibility of mail carriers to
open mailboxes that are locked, accept keys for this purpose, or lock
mailboxes after delivery of the mail.
When you install a mailbox on a curbside or roadside, make sure that
it is easily accessible to the mail carrier. Customers are required to
contact the local post office before installing the mailbox to ensure its
correct placement and height at the street. Generally, mailboxes are
installed at a height of 41-45 inches from the road surface to the
inside floor of the point of mail entry and are set back 6-8 inches from
the front face of curb or road edge to the mailbox door.
SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Phone: 1-800-624-5269 Int’l Phone: 323-846-6700
Fax: 1-800-624-5299 Int’l Fax: 323-846-6800
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2010 Salsbury Industries. All rights reserved.