Installation Guide

ManualsBrandsSalsbury Industries ManualsHardwareStandard In-Ground Mounted Mailbox Pedestal for Roadside Mailboxes in White

Roadside Mailboxes – 4325

Installation Instructions

U.S.P.S. APPROVED

Thank you for selecting Salsbury’s 4325 aluminum roadside mailbox. We are confident that the quality and construction of this product will provide

years of maintenance free use.

Model 4325 Roadside Mailbox

Installing Roadside Mailbox Directly to a Pedestal

This instruction sheet is for installing the 4325 roadside mailbox

directly to a bolt-mounted or in-ground mounted pedestal (ordered

separately). Other installation instructions are available for installing

the mailbox on a 2-wide spreader, a 3-wide spreader, in a wall or

column, on a deluxe post, or on a post in a concrete footing.

The mounting plate on the top of the pedestal has four tapped holes.

There are four 5/16” x 1/2” long hex washer head bolts provided with

the pedestal to fasten the mailbox to the top of the pedestal.

Set the mailbox on the pedestal top plate and open the lower door.

Install the hex washer head bolts through the mailbox holes into the

four holes in the pedestal top plate. Check that the bolts are

sufficiently tightened.

USPS Regulations

It is important to note that it is not the responsibility of mail carriers to

open mailboxes that are locked, accept keys for this purpose, or lock

mailboxes after delivery of the mail.

When you install a mailbox on a curbside or roadside, make sure that

it is easily accessible to the mail carrier. Customers are required to

contact the local post office before installing the mailbox to ensure its

correct placement and height at the street. Generally, mailboxes are

installed at a height of 41-45 inches from the road surface to the

inside floor of the point of mail entry and are set back 6-8 inches from

the front face of curb or road edge to the mailbox door.

SALSBURY INDUSTRIES

1010 East 62

Street, Los Angeles, CA 90001-1598

Phone: 1-800-624-5269 Int’l Phone: 323-846-6700

Fax: 1-800-624-5299 Int’l Fax: 323-846-6800

Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.

Summary of content (8 pages)

PAGE 1
Roadside Mailboxes – 4325 Installation Instructions U.S.P.S. APPROVED Thank you for selecting Salsbury’s 4325 aluminum roadside mailbox. We are confident that the quality and construction of this product will provide years of maintenance free use. Model 4325 Roadside Mailbox Installing Roadside Mailbox Directly to a Pedestal This instruction sheet is for installing the 4325 roadside mailbox directly to a bolt-mounted or in-ground mounted pedestal (ordered separately).
PAGE 2
Designer Roadside Mailboxes – 4325-D Installation Instructions U.S.P.S. APPROVED Thank you for selecting Salsbury’s 4325-D designer roadside mailbox. We are confident that the quality and construction of this product will provide years of maintenance free use. Model 4325-D Designer Roadside Mailbox Installing Roadside Mailbox Directly to a Pedestal This instruction sheet is for installing the 4325-D designer roadside mailbox directly to a bolt-mounted or in-ground mounted pedestal (ordered separately).
PAGE 3
Roadside Mailboxes - 4325 Wall or Column Mounted Installation Instructions U.S.P.S. APPROVED Thank you for selecting Salsbury’s 4325 aluminum roadside mailbox. We are confident that the quality and construction of this product will provide years of maintenance free use. Model 4325 Roadside Mailbox Installing Roadside Mailbox in a Wall or Column This instruction sheet is for installing the 4325 roadside mailbox in a hole in a wall or column.
PAGE 4
Roadside Mailboxes - 4325 2-Wide Spreader Installation Instructions U.S.P.S. APPROVED Thank you for selecting Salsbury’s 4325 aluminum roadside mailbox. We are confident that the quality and construction of this product will provide years of maintenance free use.
PAGE 5
Roadside Mailboxes - 4325 3-Wide Spreader Installation Instructions U.S.P.S. APPROVED Thank you for selecting Salsbury’s 4325 aluminum roadside mailbox. We are confident that the quality and construction of this product will provide years of maintenance free use. Installing Roadside Mailboxes on a 3-Wide Spreader Model 4325 Roadside Mailboxes This instruction sheet is for installing three 4325 roadside mailboxes on a 3-wide spreader on a bolt-mounted or in-ground pedestal (ordered separately).
PAGE 6
Roadside Mailboxes – 4325 Deluxe Arm Post Installation Instructions U.S.P.S. APPROVED Installing Arm(s) on Deluxe Mailbox Posts When you install a curbside or roadside mailbox, make sure that it is easily accessible to the mail carrier. By regulation it should be 41” to 45” from the ground or street surface up to the inside floor of the mailbox. The door should be set 6” to 8” back from the front face of the curb or the road edge.
PAGE 7
Roadside Mailboxes – 4325 In-Ground Mounted Post Installation Instructions U.S.P.S. APPROVED Installing the In-Ground Mounted Post for the Mailbox Into Concrete When you install a curbside or roadside mailbox, make sure that it is easily accessible to the mail carrier. By regulation it should be 41” to 45” from the ground or street surface up to the inside floor of the mailbox. The door should be set back 6” to 8” back from the front face of the curb or the road edge.
PAGE 8
Roadside Mailboxes – 4325 Bolt Mounted Post Installation Instructions U.S.P.S. APPROVED Installing the Bolt Mounted Post for the Mailbox onto Anchor Bolts When you install a curbside or roadside mailbox, make sure that it is easily accessible to the mail carrier. By regulation it should be 41” to 45” from the ground or street surface up to the inside floor of the mailbox. The door should be set back 6” to 8” back from the front face of the curb or the road edge.