Installation Guide

SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Phone: [phone] Int’l Phone: [phone]
Fax: [phone] Int’l Fax: [phone]
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2011 Salsbury Industries. All rights reserved. (Rev. 01, 1/5/2010) Page 3 of 4
6. Place the toe panel between the lower front corners of the uprights. Attach to the uprights by installing screws from the outside of the uprights.
Attach to the bottom by installing screws from inside the cabinet. Thread nuts onto the screws. See Figures 3 and 4.
Figure 4
7. Place the frame assembly with doors over, and outside, the edges of the uprights and the top. Fasten the frame assembly to the uprights using
washers and nuts on each hidden stud. Fasten the frame assembly to the top by installing screws from outside the cabinet. Thread nuts onto the
screws. See Figures 4 and 5.
Figure 5