Manual

3
TM
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone [phone] • Fax [phone]
Toll-Free Fax [phone] • saltdogg.com
Fig. 3
Cab Controller Installation
Instructions (Fig. 4)
1. Install cab controller (#WSE1) in cab for convenient
driver operation. Mounting bracket and fasteners
included.
2. Route 8' wire harness (#WSE24) under dash from
controller (#WSE1) to truck’s fuse panel.
3. Ground “black” wire from controller to truck frame
or truck’s battery (not dash).
4. Attach “green” wire in 8' wire harness (#WSE24) to
a fused and keyed 15 Amp hot wire circuit.
5. Connect main power “white” wire in 8' wire har-
ness (#WSE24) to fuse box that is “hot” full time or to
battery “positive”.
6. Route the 25' wire harness (#WSE25) from the
rear of the spreader to the cab. Plug connector on
controller (#WSE1) to the connector on pump harness
(#WSE25).
Fig. 4 WSE1 Cab Controller front view
Fig. 4 WSE1 Cab Controller back view
WSE25
25' Cable Connector
WSE24
8' Cable
Connector
3014080