ENGLISH PT-297 CINTA DE CORRER MOTORIZADA MOTORIZED TREADMILL MANUAL DEL USUARIO OWNER’S MANUAL OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.
ENGLISH 1. SAFETY INSTRUCTIONS WARNING: To reduce the risk of serious injury, read the following safety instructions before using the equipment. 1. Read all warnings posted on the equipment. 2. Read this Owner's Manual and follow it carefully before using the equipment. Make sure that it is properly assembled and tightened before use. 3. We recommend that two people be available for assembly of this product. 4. Keep children and pets away from the equipment.
ENGLISH 2. MAIN PARTS Console Safety Key Speed Adjustment Switch Incline Adjustment Switch Handrail Running Belt Wheel Main Frame OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.
ENGLISH 3. HARDWARE KIT Nº 74. 3.5 × 12 m/m Sheet Metal Screw (4) Nº 100. 5/16" × 18 × 1.5T Flat washer (6) Nº 125. M5 × 25m/m Phillips Head Screw (2) Nº 44. Safety Key (1) Nº 103. M6 (66 × 88) Allen Wrench (1) OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es Nº99. 5/16" × 1/2" Button Head Socket Bolt (14) Nº 101. 5/16" × 23 × 1.5T Curved washer (8) Nº 126. M5 × 35m/m Phillips Head Screw (2) Nº 104. Lubricant (1) Nº 102.
ENGLISH 4. ASSEMBLY INSTRUCTIONS STEP 1 Take out the treadmill from the carton and lay it aside on the smooth ground. STEP 2 Connect the Computer Cable (Lower)(53) with the Right Upright (4). 4 53 STEP 3 Insert the Uprights (L, R)(5,4) into the Frame Base (2) with the 8pcs of 5/16" ×1/2" Button Head Socket Bolts (99), 4pcs of 5/16" x 18 x 1.5T Flat Washers (100) and 4pcs of 5/16" × 23 × 1.5T Curved Washers (101) by using the Combination M5 Allen Wrench & Phillips Head Screw Driver (102).
ENGLISH STEP 4 Connecting the Computer Cable (Middle) (55) with the Computer Cable (Lower)(53). 55 53 STEP 5 Install the Console Support (6) into the Uprights (L,R) (5,4) with the 6pcs of 5/16" ×1/2" Button Head Socket Bolts (99) , 2pcs of 5/16" × 18 × 1.5T Flat Washers (100) and 4pcs of 5/16" × 23 × 1.5T Curved Washers (101) by using the Combination M5 Allen Wrench & Phillips Head Screw Driver (102). 99 101 6 100 99 101 99 101 4 100 99 99 101 99 5 OWNER’S MANUAL V.
ENGLISH STEP 6 Install the Outer Handlebar Covers (L & R) (129 & 130) on the Console Support (6) with the 4pcs of 3.5 × 12 m/m Sheet Metal Screws (74) by using the Combination M5 Allen Wrench & Phillips Head Screw Driver (102) and tighten them. 6 130 129 74 74 74 OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.
ENGLISH STEP 7 Connect the Computer Cable (Middle) (55) with the Computer Cable (21-10). Connect the Connecting Cable (90-7) with the Connecting Cable (21-9). Connect 5-Pin HR receiver upper cable (21-11) and 5-Pin HR receiver lower cable (90-8). 21-11 21-9 21-10 55 90-8 90-7 STEP 8 Insert the Console Assembly (21) into the Console Support (6).
ENGLISH 5. CONSOLE INSTRUCTIONS After turning on and put on the safety key, the console will show up welcome greeting then display total running mileage, hours, program version and then enter ready mode. When total mileage accumulates to 100 km total running time to 150 hours, the system will show a lubrication prompt. After this prompt is shown two times, the message will be deleted automatically. 5.1. WINDOW DISPLAYS TIME：Accumulated running time from 00:00~99:59 or count-down time from 10~99:00.
ENGLISH DOWN：Press this button while running to decrease the incline. Press once each time decreases one incline level. ENTER：Press this button to enter setting the parameter. While setting, press this button again to accept and enter next step. Press this button while running to switch the dot matrix window between speed and incline profiles. FAN： This function is optional. Press this button to the fan on/off. PROGRAM: Press this button to choose training mode.
ENGLISH USER MODE. This mode provides five personal profiles. A. B. C. D. E. F. Use PROGRAM to select the USER mode. Use UP/DOWM buttons to switch the user names. Use NAME to enter the user name with FAST/SLOW buttons to enter characters A~Z. There are no more than 7 characters to enter. Press STOP after entering the last character and exit. Now the value of the weight is displayed. Use FAST/SLOW buttons to adjust the weight and press ENTER for next setting. Now the value of the age will be displayed.
ENGLISH 6. ADJUSTMENTS UNFOLDING Pull locking knob and hold running deck and lower down to the floor. (As shown Figure 1_2.) FOLDING Pull the locking knob with right hand, left hand lift the running deck up to 30cm then two hands lift it until it is locked by the locking knob. (As shown in Figure 3_4) TRANSPORT Before moving the treadmill, convert the treadmill to the storage as described above. Make sure that the Locking Knob is closer fully over the frame guide. 1).
ENGLISH BELT ALIGNMENT If during use you notice that walking belt either shifts to the right or the left of center, first remove "Safety Key" and unplug equipment from AC power source. Using M6 Allen wrench provided, turn left rear roller adjustment as indicated below clockwise no more the 1/4" of a turn. Remove M6 Allen wrench, insert "Safety Key" and insert AC power cord into AC outlet. Turn on your treadmill and observe after running a few minutes to see if problem has been corrected.
ENGLISH 7. MAINTENANCE The maintenance of the equipment is easy: • Dry and clean those areas exposed to perspiration, especially the console. It is recommended to use towels in order to avoid the sweat falling to the equipment. • Dust and dirt may be the cause of functioning problems in the gears and the internal bearings. It is recommended keeping the equipment casing and its different elements clean. ¡ATTENTION! Error message “LOST SPEED” : The signal of RPM speed has been lost.
ENGLISH 8.
ENGLISH Nº Description 40 41 42 43 44 Motor Cover Anchor □21.4 × 21.4m/m_Square End Cap □25.4 × 25.
ENGLISH Nº 90~7 90~8 91 92 93 95 96 99 100 101 102 103 104 105 106 111 112 113 114 114~2 114~3 114~4 115 115~2 115~3 115~4 116 125 126 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 147 148 149 150 Description 150m/m_Computer Cable 150m/m_Computer Cable 4 × 12m/m_Sheet Metal Screw Belt Guide 5 × 16m/m_Tapping Screw Cylinder M8 × 50m/m_Flat Head Countersink Bolt 5/16" × 1/2"_Button Head Socket Bolt 5/16" × 18 × 1.5T_Flat Washer 5/16" × 23 × 1.
ENGLISH OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.
ENGLISH 9. ENVIRONMENTAL NOTE The symbol with which is marked this unit (waste bin with wheels) indicates that it cannot be thrown for any reason to the domestic waste. When disposing of the product should be taken to a proper recycling point. If properly dispose of the product may be reused and recycled, and it will help to conserve natural resources, preserve the environment and significally reduce the potential negative impact on our environment.
