Induction Hob 2 YEAR GUARANTEE Model No.
THIS APPLIANCE IS FOR DOMESTIC USE ONLY READ ALL INSTRUCTIONS BEFORE USE. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. IMPORTANT SAFEGUARDS WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING: • This appliance requires a 220-240V AC power supply.
SAFETY CAUTIONS PLEASE READ THIS SECTION CAREFULLY BEFORE USING THE APPLIANCE • When using this appliance, the hob surface will become hot and can remain hot for some time after use. Do not touch without oven gloves until it has been given sufficient time to cool. • Do not use the appliance near other heat sources, directly underneath a wall cupboard or in an enclosed space. Keep away from curtains and other flammable materials.
INTRODUCTION TO INDUCTION COOKING Your SALTER induction hob is made from smooth, easy to clean microcrystal glass. The heat for cooking comes from a magnetic induction coil which directly heats the base of the pan with great speed and efficiency. Using this system, temperature adjustments can be made very rapidly, giving you precise control over your cooking. To be suitable for induction cooking, pans need to be made from a ferrous metal such as cast iron or steel.
USING THE PROGRAM FUNCTIONS Your SALTER induction hob has 6 built-in program functions, as described in the table below. These programs are designed to make the everyday cooking quicker and easier at the touch of a button. Select the required program by pressing the SYMBOL button until the LED lights up above the SYMBOL. NOTE: To override the programmed power setting at any time; simply use the / buttons to raise or lower the power as required.
CHILD LOCK To activate the child lock, press and hold the CHILD LOCK button for 3 secs until the relevant LED light comes on. When child lock is activated the control buttons will not work, preventing any accidental operation. The exception is the power button which, for safety, can still be used to power off. To remove the child lock, press again for another 3 secs.
TECHNICAL DATA • • • • Voltage: 220-240V~50Hz Power: 2200 Watts Power consumption in Standby mode: <0.5W Protection Classification: II Replacing the plug If the plug on this appliance is damaged, it can be replaced with a BS 1363 plug, fitted with a 13A BS 1362 fuse. Only use a 13 amp fuse with this appliance. Care must be taken when changing the plug. If in doubt, contact a qualified electrician.
2 YEAR GUARANTEE This product is intended for domestic use only. Salter will repair or replace the product, or any part of this product free of charge if within 2 years of the date of purchase, it can be shown to have failed through defective workmanship or materials. This guarantee covers working parts that affect the function of the appliance. It does not cover cosmetic deterioration caused by fair wear and tear or damage caused by accident or misuse.
