Installation Guide

ManualsBrandsSalto Systems ManualsElectronicsAElement BLE Mifare with Bluetooth technology Electronic Lock Series including all mechanical variants.

Table Of Contents

SALTO SYSTEMS S.L. www.saltosystems.com 2/2 xxxxxx-ED.-14/12/2017

Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain.

All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.

Compliance

MECHANICAL WARNINGS

In order to confirm the correct

operation

of this

electronic device, SALTO recommends

using it in combination with a lock

destined

for that use (door mass,

frequency

of use,

fire

door, etc) and that is in good

operational

conditions.

The SALTO

product should be treated with care during the

installation

process to avoid any

aggressive

contact that may damage

the unit. It may be

necessary

loosen

the trims mounting during

installation.

Do not bring the

device

into contact with oil, paints or acids. Do not paint the door with the mortise

lock or

electronic device already

mounted on the door.

CLEANING THE ELECTRONIC DEVICE:

a damp cloth with mild soapy water can be used.

Never

use

abrasive

soaps or

sprays.

For

best

performance, stainless steel

should be

cleaned

regularly. Note that when the door is closed without the lock having been already programmed, the lock will automatically lock and can only be

opened with a Portable Programing Device (PPD). If you have questions or doubts on this, please contact your authorized SALTO supplier.

LEGAL WARNINGS

The user shall be responsible for the correct use and maintenance of the access control equipment according to the instructions herein. SALTO shall not be responsible for any defect,

malfunction, loss or damage, whether direct or indirect, caused by or arisen from any improper installation or utilization of the equipment or which contravenes, transgresses or infringes in

any manner the abovementioned instructions.

SALTO’s liability concerning the equipment is limited to the warranty provided. The warranty does not cover product failures due to repairs, modifications or product manipulations performed

in the access control equipment or in the inner electromechanical structure by anyone other than authorized SALTO dealers or personnel.

FCC COMPLIANCE STATEMENT

This device complies

with Part 15 of the

FCC Rules. Operation

is subject to the

following

two conditions:

(1)

this

device

may not cause

harmful interference,

and

(2)

this

device

must

accept any

interference received, including interference

that may cause undesired

operation. Changes

modifications

not

expressly

approved by the party

responsible

for

compliance

could void the user’s

authority

to operate the equipment.

Note:

This equipment

has been tested and found to comply with the

limits

for a

Class

digital device, pursuant

to part 15 of the FCC

Rules. These limits

are

designed

to provide

reasonable

protection

against harmful interference

in a

residential installation.

This

equipment generates,

uses, and can

radiate

radio

frequency energy

and, if not

installed

and used

in accordance with the instructions may cause

harmful interference

to radio

communications. However,

there is no

guarantee

that

interference

will not occur in a particular

installation.

If this

equipment

does cause

harmful interference

to radio or

television

reception, which can be

determined

by turning the

equipment

off and on, the user is

encouraged

to try to correct the

interference

by one or more of the

following

measures:

•

Reorient

relocate

the

receiving

antenna.

•

Increase

the

separation

between the

equipment

and receiver.

•

Connect the

equipment

into an outlet on a circuit

different

from that to which the

receiver

is connected.

•

Consult the

dealer

or an

experienced radio/TV technician

for help.

This product is a radio transmitter and receiver to be used in mobile conditions.

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

We, SALTO Systems, S.L., hereby declare that the equipment bearing the model number specified above was tested conforming to the applicable FCC Rules.

Responsible Party – U.S. Contact Information

Salto Systems Inc. USA

1780 Corporate Drive, Suite 400

Norcross, GA

30093

l.saldana@saltosystems.com

CANADIAN COMPLIANCE STATEMENT

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly

approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en

compromettre le fonctionnement.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to ICES-003.