Instruction manual

8
CLEANING AND MAINTENANCE
• This appliance is for household use only and is not user-serviceable.
• Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
• Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning. Ensure that the speed control is set to “0”.
• Firstly remove the crumbs from the baking surfaces.
• Wait for the surfaces to cool down before cleaning, wipe the baking surfaces with
a soft damp cloth.
• The body of the appliance and the stand should be cleaned with a damp cloth.
Do not let water enter the appliance or the stand.
• Do not use bleach or other abrasive substance or solvents to clean your
appliance as it can be damaging to the finish.
• Do not immerse the whole unit in water or any other liquid, or hold it under a
running tap to clean.
• To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a clean,
dry, soft cloth.
Tip: Burnt-on batter is easy to remove after applying a small quantity of vegetable oil
and allowing it to stand for a while. After a few minutes, the batter comes off easily.
STORING THE APPLIANCE
• Unplug the unit from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.
• Store the appliance in its box or in a clean, dry place.
• Never store the appliance while it is still wet or dirty.
• Never wrap the power cord around the appliance.
SERVICING THE APPLIANCE
There are no user serviceable parts in this appliance. If the unit is not operating
correctly, please check the following:
• You have followed the instructions correctly