INSTRUCTIONS AND WARRANTY MODEL NO.
Thank you for purchasing our Salton Elite Ice Maker. Each unit is manufactured for safety, reliability and ease of use. Before using this appliance for the first time, please ensure that you read the instruction manual carefully and keep them for future reference. IMPORTANT SAFETY INSTRUCTIONS Make sure that the power supply corresponds to the one indicated on the rating label. Only use an earthed plug, and ensure that the electrical connections are grounded.
INSTRUCTIONS FOR USE OF THE SALTON ELITE ICE MAKER 1. Place the Ice Maker on a level, non-slip surface. Ensure that the unit has 20cm open space on all sides and above the unit. 2. Open the front lid and fill the water tank with water to the full mark. Close the lid 3. Insert the plug into the mains wall socket (230V) and switch on the outlet. 4.
CONTROL PANEL PLEASE TAKE NOTE OF THE FOLLOWING Always empty the unit of all ice and water before storage, or between uses. The first sets of ice cubes will take slightly longer to produce as the compressor needs to warm up. A small amount of heat may emanate from the unit as the unit needs to release heat while working After extended use of 5 hours, switch the machine off and let it cool for at least one hour before commencing use. CLEANING 1. Before cleaning, always unplug the appliance.
CHANGING THE PLUG Should the need arise to change the fitted plug, follow the instructions below. This unit is designed to operate on 230V-240V current only. Connecting to other power sources may damage the appliance. Connect a three-pin plug as follows: The wires in this mains lead are coloured in accordance with the following code: Green/Yellow = Earth Blue = Neutral Brown = Live SERVICING THE APPLIANCE Please note that this unit has NO user serviceable parts.
If the appliance still does not work after checking the above: Consult the retailer for possible repair or replacement. If the retailer fails to resolve the problem and you need to return the appliance, make sure that: The unit is packed carefully back into its original packaging. Proof of purchase is attached. A reason is provided for why it is being returned. If the supply cord is damaged, it must be replaced by the manufacturer or an authorized service agent in order to avoid any hazard.
PLEASE AFFIX YOUR PROOF OF PURCHASE/RECEIPT HERE IN THE EVENT OF A CLAIM UNDER WARRANTY THIS RECEIPT MUST BE PRODUCED. WARRANTY 1. Tedelex Trading (Pty) Limited (“Tedelex”) warrants to the original purchaser of this product (“the customer”) that this product will be free of defects in quality and workmanship which under normal personal, family or household use and purpose may manifest within a period of 1 (one) year from the date of purchase (“warranty period”). 2.
7. The customer may be responsible for certain costs where products returned are not in the original packaging, or if the packaging is damaged. This will be deducted from any refund paid to the customer. TEDELEX TRADING (PTY) LTD (JOHANNESBURG) JOHANNESBURG TEL NO. (011) 490-9000 CAPE TEL NO. (021) 552-5161 TOWN DURBAN TEL NO. (031) 792-6000 www.amap.co.