Instruction manual
2 
Thank you for purchasing our Salton Elite Ice Maker. Each unit is manufactured for safety, 
reliability and ease of use. Before using this appliance for the first time, please ensure that 
you read the instruction manual carefully and keep them for future reference.   
IMPORTANT SAFETY INSTRUCTIONS 
  Make sure that the power supply corresponds to the one indicated on the rating 
label. 
  Only use an earthed plug, and ensure that the electrical connections are grounded. 
  To protect against risk of electrical shock do not immerse product in water or other 
liquid. 
  Do not over-fill the water compartment 
  Use only drinking water in this unit. 
  Unplug from outlet when not in use, before putting on or taking off parts and before 
cleaning or moving. 
  Do  not  operate  product  with  a  damaged  cord  or  plug  or  after  the  appliance 
malfunctions, or is dropped or damaged in any manner. Return the appliance to the 
nearest  authorized  service  facility  or  manufacturer  for  examination,  repair  or 
electrical or mechanical adjustment. 
  The use of attachments that are not recommended or provided by manufacturer may 
cause, fire electric shock or injury. The manufacturer cannot be help responsible if 
this instruction has been ignored 
  Do not use this appliance outdoors. 
  Do not place the product on or near a hot burner or any other kind of heating device. 
  Do not use the appliance for anything other than intended use. 
  This appliance is for domestic use only. Should the unit be utilized for industrial or 
commercial use, the warranty becomes invalid. 
  This  appliance is not a  toy. To avoid danger  of suffocation, keep  packaging  away 
from babies and children. 
  Do not allow the cord hang over the edge of the table or counter or to touch hot 
surfaces. 
  To disconnect, grip the plug and pull from the wall outlet. Never pull on the cord. 
  Never attempt to open any part or to dismantle the controls. Responsibility for failure 
cannot be accepted if these instructions have been ignored. 
  Do not use abrasive or chemical agents to clean this machine. Use a damp cloth. 








