Instruction manual

5
CHANGING THE PLUG
Should the need arise to change the fitted plug, follow the instructions below.
This unit is designed to operate on 230V-240V current only. Connecting to other
power sources may damage the appliance. Connect a three-pin plug as follows:
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow = Earth Blue = Neutral Brown = Live
SERVICING THE APPLIANCE
Please note that this unit has NO user serviceable parts. Any attempt to service it will
nullify the warrantee.
TROUBLE SHOOTING
If the unit is not operating correctly, please check the following:
PROBLEM
POSSIBLE CAUSE
THE COMPRESSOR
MAKES A THUNDERING
NOISE
THE VOLTAGE IS LOWER
THAN REQUIRED
‘FILL WATER”
INDICATOR IS ON BUT
THERE IS ENOUGH
WATER IN THE TANK
THE WATER PUMP IS
DAMAGED, CAN NOT PUMP
WATER
THE WATER DETECTOR IS
NOT ‘SEEING’ THE WATER
“ICE FULL” INDICATOR
IS ON BUT THERE IS
LITTLE ICE IN THE
STORAGE BOX
THE TEMPERATURE OF THE
STORAGE BOX IS TOO LOW
“fill water” indicator
and “ice full”
indicator are on in the
same time.
THE ICE SHOVEL CANNOT
WORK
ICE STORAGE BOX IS FULL,
THE SHOVEL IS BLOCKED BY
THE ICE
THE ICE IS TOO BIG AND IS
BLOCKING THE SHOVEL
THE SHOVEL HAS SHIFTED
AND IS BLOCKED
POSITION SWITCH IS
UNWORKABLE
COMPRESSOR CAN
NOT MAKE ICE
REFRIGERANT HAS LEAKED
ELECTROMAGNETIC VALVE
HAS LEAKED
IT CAN MAKE ICE BUT
CAN NOT PULL THE ICE
OFF THE SHOVEL
AUTOMATICALLY
ELECTROMAGNETIC VALVE
IS DAMAGED
POWER WIRE IS DAMAGED
THE MACHINE STOPS
SUDDENLY DURING
THE ICE-MAKING
PROCESS
THE SURGE-PROTECTOR
STOPPED THE MACHINE AS
IT IS TOO HOT