Owner's manual

Instructions for Use (Cont.)
CAUTION: Do not insert Temperature Control into Control
Socket without first setting Pan onto Base.
CAUTION:
The Temperature Control is a sensitive device; use
care not to drop, hit or impact the Temperature Control against
hard surfaces, as it could affect the temperature reading. Do not
use the Temperature Control if it overheats or is damaged in any
other way.
3. Locate Control Socket. Align probe on
Temperature Control with center hole in
Control Socket. Push Temperature
Control firmly into Control Socket until the
ridge above the Temperature Dial is flush
with the Base. See Figure 3.
4. Turn Temperature Dial to "Off" (unit is off
when "Off" aligns with point on arrow).
5. Plug the Cord into a standard 120V AC electrical outlet.
6. Turn the Dial to desired setting (200˚F - 425˚F). The Temperature
Ready Light will turn on as the dial turns past different tempera-
ture settings. This indicates the unit is receiving power.
7. The Oval Roaster/Grill Pan takes approximately 4 to 8 minutes
to preheat, depending on the temperature setting. The unit may
make a "creaking" noise during preheat and at different times
as it maintains the set temperature. This is normal and is due to
the expansion of the parts during the heating process. The
Temperature Ready Light will turn off when the unit has reached
the temperature indicated on the Dial.
Cooking with your Oval Roaster/Grill Pan
WARNING: This appliance generates heat and escaping steam
during use. Proper precautions must be taken to prevent the risk
of burns, fires, or other injury to persons or damage to property.
CAUTION: Do not use metal or sharp utensils as these can
damage the non-stick surface of the Pan. Do not leave plas-
tic utensils on the Pan while it is hot.
Figure 3
7