User's Manual

10 | P a g e
A missing or damaged tire sensor can be replaced easily through the In-car
unit. You will need to purchase a replacement sensor which you can do so
online at www.my-fobo.com. To replace the sensor, first select „Disable
Sensor‟ on the In-car unit under sensor Management system and the pop-up
will prompt you to tap on the tire position that you want to disable. Then,
select „Replace sensor‟, upon selecting the app will blink at the first disabled
position and the App will prompt you to install the replacement sensor.
Follow the on-screen instruction and the replacement sensor will be paired
and be ready to use.
NOTE: Battery life span up to Fifteen months is an estimate based on
normal use at 23 °C. Battery life may vary according to usage and
climatic temperature.
Battery life span will change due to the following reasons:
1) Frequent change of pressure threshold setting in the App.
2) Disabling & enabling of sensors.
3) Release & pairing.
4) Removal & screw-on of sensors.
5) Operating under extreme cold/hot temperature.
6) Testing of product.
7) Rotation (refer section 5.4 of this user manual)
8) Trigger alert or let activated alerts unattended.
9) Multiple removal and screw-on of sensors for equalizing all tire
pressures.
All these activities will drain a battery very fast and affect the battery life
span.