User's Manual

18 | P a g e
need to physically remove the sensors. To correct the position of the sensors
in the in-car unit, please select “sensor Rotation” under Main Menu on in-car
unit. You will be prompted by the in-car unit to:
1) Select the sensor position to rotate. Move to the desired position to
select the sensor by using the arrow key which is in the middle of the in-
car unit/Repeater.
2) Upon selection, you will be prompted to touch the sensor to the in-car
unit /Repeater.
3) There will be an audible sound with a message to indicate successful
registration of new position.
4) Choose NEXT to go to another tire position to rotate.
5) Choose END to complete the rotation process.
You are now ready to use FOBO Ultra with the new tire positions. You can
perform tire rotation as often as you want.
5.5 Disable sensor and Replace new sensor
You may want to disable a sensor due to a missing sensor or damaged sensor
or to install a replacement sensor. Disabling a missing or damaged sensor will
remove future missing sensor alerts.
To disable a tire sensor:-
1. Go to Sensor Management in the Menu of In-Car/Repeater, select
“Disable sensor”.
2. Select the tire position in the screen to disable.
3. Once disabled You will see “Sensor Disabled” message will appear on the
screen. Take note that FOBO Ultra will stop monitoring the disabled
sensor position.
To install a replacement tire sensor:-
1. Select “Replace sensor” under Sensor Management in the Menu of In-
Car/Repeater.
2. The first disabled position will be blinking.
3. Move to the desired disabled position to assign a replacement sensor.
4. Select the tire position to replace.
5. You will be prompted to touch the sensor to the in-car unit.