User's Manual

19 | P a g e
6. Once replaced you will see “Sensor is successfully replaced..”. Please
mount the sensor to the physical tire position in accord with the screen
message.
NOTE: You can only install a replacement sensor after the tire position has
been “Disabled”. You can purchase replacement sensors online from
www.my-fobo.com.
5.6 Transfer FOBO Ultra to another user
Before passing on your FOBO Ultra set to another user, you will have to
release the Total system from your FOBO account. Select “Release (Total
sensor)” under Main Menu on in-car unit then “Release total system”.
Make sure your In-Car unit and smartphone are with you. You will be
prompted with a message to “Select PROCEED to continue and follow the
instruction on the phone App”, upon selecting PROCEED; the In-Car unit
will connect to the smartphone. You will hear an audible sound upon
successful release and “System released” message will appear on in-car unit
screen.
5.7 Tire Inflation/Deflation
To Inflate/Deflate the tire user just need to unscrew the sensor, inflate/deflate
the tire then screw back the sensor on tire valve. User do not need to release
or disable the sensor.
5.8 Hook & Drop
With its patent pending F.I.T (FOBO Intra Connect) technology, FOBO Ultra
System offers Hook & Drop for easy attachment and detachment of trailers to
prime mover. F.I.T. enables harvesting of sensor data by clusters of
individual sensors and then transmits the data amongst inter-connected
clusters to the In-Car unit. FOBO Ultra system can display up to 94 wheel
positions with a combination of 1 In-Car + 3 Repeater clusters. For example,
for a prime mover that hauls 3 trailers, FOBO Ultra allows 1 In-Car unit for
the prime mover and 3 repeater units for the 3 Trailers. 1 In-Car unit can
monitor up to a cluster of 22 sensors while each Repeater unit can monitor up
to a cluster of 24 sensors. Each Repeater unit can be independently controlled,
programmed and monitored.