User's Manual

Guided Tour - AF1 / AG1 Transmitters

Samson AirLine

3: 15 dB Pad - Move this switch in the direction of the arrow to

reduce the output of the AF1 or AG1 by 15 dB when your

instrument is putting out too hot a signal. See the “Setting Up and

Using the AirLine System” section on page 9 in this manual.

4: Power switch - Move this switch in the direction of the arrow

to turn power to the AF1 or AG1 on; move it away from the arrow

to turn power off.

5: Antenna - This permanently attached flexible antenna should

be fully extended during normal operations. See the “Setting Up

and Using the AirLine System” section on page 9 in this manual

for more information about antenna positioning.

6: Battery cover - Pull back gently on this cover at the ribbing

and pry upwards to remove. See the “Setting Up and Using the

AirLine System” section on page 9 in this manual.

7: Battery compartment - Insert a standard AAA alkaline battery

here, being sure to observe the plus and minus polarity markings

shown. We recommend the Duracell type battery. Although

rechargeable Ni-Cad batteries can be used, they do not supply

adequate current for more than four hours.

WARNING: Do not

insert the battery backwards; doing so can cause severe damage

to the AF1 / AG1 and will void your warranty.

ENGLISH

SAMSON

15dB PAD