User Manual

Go Mic Mobile

Getting Started - Mounting to a smartphone

Afﬁxing to a cold shoe adapter

1. Loosen the Lock Screw until the mounting arm can be adjusted.

2. Position the receiver on the rear side of the smartphone.

3. Slide the mounting arm so that it is tight with the edge of the smartphone.

4. Tighten the Lock Screw.

1. Remove the Fixed Mounting Arm by removing the two screws.

Note: Save screws for reattaching the mounting arm.

2. Remove the Adjustable Mounting Arm by completely loosening the Lock Screw.

Slide the mounting arm out of the receiver. Replace the Adjustable Mounting

Arm with the small insert piece.

3. Replace the Lock Screw

4. Position the included shoe mount adapter on the bottom of the Go Mic Mobile

Receiver, take note that the shoe mount adapter is keyed so it will stay in

position when attached to the receiver.

5. Using the included screw, fasten the shoe mount adapter to the receiver by

tightening the screw.

6. Slide the GMM Receiver into the shoe mount of the connecting device.

7. Once positioned, tighten the large thumb screw on the receiver shoe mount to

hold in place.