User's Manual
Table Of Contents
- General Safety Precautions
- List of Contents
- 1 Overview
- 2 Basic Settings; General Remarks about Operating
- 3 PPI Settings
- 3.1 Screen Stabilisation of the PPI: True Motion, Relative Motion
- 3.2 PPI Orientation: Head-Up, North-Up, Course-Up
- 3.3 Centering / Off-Centering of the Display (Center, Off-Center)
- 3.4 Range Selection (Range)
- 3.5 Range Rings, Grid
- 3.6 Own Ship Symbols and Target Symbols, Vectors, Past Position Plots
- 3.7 Trails
- 3.8 Setting the Display of Pre-planned Tracks
- 3.9 Defining the System Track and the Next Waypoint; System Track Display
- 3.10 Setting the Display of User Chart Objects on the RADARPILOT
- 3.11 Setting the Display of Charts and User Chart Objects on the CHARTRADAR
- 3.12 Setting the Display of the Map
- 3.13 Adjusting the Chart or Map to the Radar Video
- 4 Setting the Radar Function
- 4.1 Radar Function On/Off, Interswitch Functions, Master/Slave Switch-Over
- 4.2 Basic Setting of the Radar Video
- 4.3 Selection of the Antenna Revolution Rate
- 4.4 Radar Setting for High Speed of Own Vessel (HSC)
- 4.5 Radar Setting for the Display of RACON Codes
- 4.6 Radar Setting for SART Detection (X-Band only)
- 4.7 Suppression of the Synthetics and Video
- 5 Heading, Speed, Position
- 6 Bearing and Range
- 7 ARPA Functions
- 7.1 Symbols Used
- 7.2 Procedure of the Target Acquisition
- 7.3 Manual Target Acquisition
- 7.4 Automatic Target Acquisition; Settings of the Acquisition/Guard Zone
- 7.5 Deletion of Targets, Loss of Target
- 7.6 Target Data Display
- 7.7 Target Labels
- 7.8 Selecting the Reference Targets for Reference Target Tracking
- 8 EPA Functions (Electronic Plotting Aid)
- 9 Collision Avoidance (TCPA, CPA)
- 10 Trial Manoeuvres
- 11 Editing of Pre-planned Tracks
- 12 Editing the Map
- 13 Displays in the Multidisplay
- 14 Quick Info Box
- 15 Evaluation of the Radar Video
- 16 The Radar Keyboard
- 17 Alarm Management
- 18 List of Alarms
- 19 List of the Alarm Signal Outputs
- 20 Care and Maintenance Work
- 21 Performance Monitor
- 22 System Maintenance Manager
- 22.1 Determining the Versions of Software, Hardware and Documentation
- 22.2 Listing the System Faults
- 22.3 Off-Line Selfcheck
- 22.4 Checking / Correcting the Computer Time
- 22.5 Distribution and Deletion of Map Data; Data Saving
- 22.6 Exchanging Track Files between the Indicators; Data Saving
- 22.7 The Handling of Diskettes
- 22.8 Aborting and Restarting the Program of the Radar System
RADARPILOT / CHARTRADAR
ED 3038 G 232 / 01 (2002-06)
Operating Instructions
2 Basic Settings; General Remarks about Operating
2.3 Brilliance and Colour Selection
b_r1_e12.fm / 21.06.02
22
Setting the Brilliance of Individual Elements
1. Click on the BRILL button.
2. Click on the SETTINGS button.
3. Now, by means of the procedures already described, the
following items can be set:
- After clicking on the LAMPS area: the brilliance of the
lamps on the keyboard.
- After clicking on the DATA area: the brilliance of the
whole area outside the PPI.
- After clicking on the SCALE area: the brilliance of the
compass scale.
- After clicking on the VIDEO area: the brilliance of the
radar video.
- After clicking on the SYMBOLS area: the brilliance of
the target synthetics and of the own ship symbol.
- After clicking on the MARKER area: the brilliance of
the cursor, heading line, stern line, EBL’s, VRM’s and
range rings.
- After clicking on the MAP (or MAP / CHART) area: the
brilliance of the map (or chart), tracks and guard
zones.
These settings can independently be made for each colour
palette.
Setting the Optional Illumination of the Optional Keyboard
Setting is performed in the BRILLIANCE menu by means of the
PANEL area. During this process, the procedure already
described should be used.
BRILL
1.DO
2.DO
3.DO
SYMBOLS
MARKER
MAP
SCALE
SETTINGS
VIDEO
LAMPS
DATA
In Chart Display Mode, this area is
labelled MAP / CHART
PANEL
BRILL
1.DO
90%
4.DO
2.DO
3.