User's Manual
Table Of Contents
- General Safety Precautions
- List of Contents
- 1 Overview
- 2 Basic Settings; General Remarks about Operating
- 3 PPI Settings
- 3.1 Screen Stabilisation of the PPI: True Motion, Relative Motion
- 3.2 PPI Orientation: Head-Up, North-Up, Course-Up
- 3.3 Centering / Off-Centering of the Display (Center, Off-Center)
- 3.4 Range Selection (Range)
- 3.5 Range Rings, Grid
- 3.6 Own Ship Symbols and Target Symbols, Vectors, Past Position Plots
- 3.7 Trails
- 3.8 Setting the Display of Pre-planned Tracks
- 3.9 Defining the System Track and the Next Waypoint; System Track Display
- 3.10 Setting the Display of User Chart Objects on the RADARPILOT
- 3.11 Setting the Display of Charts and User Chart Objects on the CHARTRADAR
- 3.12 Setting the Display of the Map
- 3.13 Adjusting the Chart or Map to the Radar Video
- 4 Setting the Radar Function
- 4.1 Radar Function On/Off, Interswitch Functions, Master/Slave Switch-Over
- 4.2 Basic Setting of the Radar Video
- 4.3 Selection of the Antenna Revolution Rate
- 4.4 Radar Setting for High Speed of Own Vessel (HSC)
- 4.5 Radar Setting for the Display of RACON Codes
- 4.6 Radar Setting for SART Detection (X-Band only)
- 4.7 Suppression of the Synthetics and Video
- 5 Heading, Speed, Position
- 6 Bearing and Range
- 7 ARPA Functions
- 7.1 Symbols Used
- 7.2 Procedure of the Target Acquisition
- 7.3 Manual Target Acquisition
- 7.4 Automatic Target Acquisition; Settings of the Acquisition/Guard Zone
- 7.5 Deletion of Targets, Loss of Target
- 7.6 Target Data Display
- 7.7 Target Labels
- 7.8 Selecting the Reference Targets for Reference Target Tracking
- 8 EPA Functions (Electronic Plotting Aid)
- 9 Collision Avoidance (TCPA, CPA)
- 10 Trial Manoeuvres
- 11 Editing of Pre-planned Tracks
- 12 Editing the Map
- 13 Displays in the Multidisplay
- 14 Quick Info Box
- 15 Evaluation of the Radar Video
- 16 The Radar Keyboard
- 17 Alarm Management
- 18 List of Alarms
- 19 List of the Alarm Signal Outputs
- 20 Care and Maintenance Work
- 21 Performance Monitor
- 22 System Maintenance Manager
- 22.1 Determining the Versions of Software, Hardware and Documentation
- 22.2 Listing the System Faults
- 22.3 Off-Line Selfcheck
- 22.4 Checking / Correcting the Computer Time
- 22.5 Distribution and Deletion of Map Data; Data Saving
- 22.6 Exchanging Track Files between the Indicators; Data Saving
- 22.7 The Handling of Diskettes
- 22.8 Aborting and Restarting the Program of the Radar System
ED 3038 G 232 / 01 (2002-06)
Operating Instructions
12 Editing the Map
12.2 Editing of Symbols
b_r1_e30.fm / 21.06.02
95
RADARPILOT / CHARTRADAR
The following symbols can be edited:
Inserting a Symbol by Numeric Input of the Position
1. With the virtual keyboard, input the geographical coordi-
nates behind LAT and LON.
2. By clicking on the APPLY button, the defined symbol is
inserted in the map at the position which you have
entered.
Inserting a Symbol by Clicking
On the PPI, click on the insertion position. The specified object
is inserted in the map.
Moving of Symbols
1. Select the editing function MOVE.
2. On the PPI, click on the symbol that is to be moved.
3. Click on the insertion position or input the insertion posi-
tion numerically (see above).
Deletion of Symbols
1. Select the editing function DELETE.
2. On the PPI, click on the symbol that is to be deleted.
Beacon, Lateral
- No Topmark
- Porthand
- Starboardhand
Beacon, Cardinal
-North
-East
-South
-West
Beacon, Safe Water
Beacon, Special Purpose
Beacon, Isolated Danger
Buoy, Lateral
- No Topmark
- Porthand
- Starboardhand
Buoy, Cardinal
-North
-East
-South
-West
Buoy, Safe Water
Buoy, Special Purpose
Buoy, Isolated Danger
Wreck
1a.DO
4 5 6
1 2 3
1b.
008:36.
2.DO
LAT
LON
55:35. 285 N
008:36. 437 W
APPLY
AT POSITION
NEW
MOVE
DELETE
NEW
MOVE
DELETE