User's Manual
Table Of Contents
- General Safety Precautions
- List of Contents
- 1 Overview
- 2 Basic Settings; General Remarks about Operating
- 3 PPI Settings
- 3.1 Screen Stabilisation of the PPI: True Motion, Relative Motion
- 3.2 PPI Orientation: Head-Up, North-Up, Course-Up
- 3.3 Centering / Off-Centering of the Display (Center, Off-Center)
- 3.4 Range Selection (Range)
- 3.5 Range Rings, Grid
- 3.6 Own Ship Symbols and Target Symbols, Vectors, Past Position Plots
- 3.7 Trails
- 3.8 Setting the Display of Pre-planned Tracks
- 3.9 Defining the System Track and the Next Waypoint; System Track Display
- 3.10 Setting the Display of User Chart Objects on the RADARPILOT
- 3.11 Setting the Display of Charts and User Chart Objects on the CHARTRADAR
- 3.12 Setting the Display of the Map
- 3.13 Adjusting the Chart or Map to the Radar Video
- 4 Setting the Radar Function
- 4.1 Radar Function On/Off, Interswitch Functions, Master/Slave Switch-Over
- 4.2 Basic Setting of the Radar Video
- 4.3 Selection of the Antenna Revolution Rate
- 4.4 Radar Setting for High Speed of Own Vessel (HSC)
- 4.5 Radar Setting for the Display of RACON Codes
- 4.6 Radar Setting for SART Detection (X-Band only)
- 4.7 Suppression of the Synthetics and Video
- 5 Heading, Speed, Position
- 6 Bearing and Range
- 7 ARPA Functions
- 7.1 Symbols Used
- 7.2 Procedure of the Target Acquisition
- 7.3 Manual Target Acquisition
- 7.4 Automatic Target Acquisition; Settings of the Acquisition/Guard Zone
- 7.5 Deletion of Targets, Loss of Target
- 7.6 Target Data Display
- 7.7 Target Labels
- 7.8 Selecting the Reference Targets for Reference Target Tracking
- 8 EPA Functions (Electronic Plotting Aid)
- 9 Collision Avoidance (TCPA, CPA)
- 10 Trial Manoeuvres
- 11 Editing of Pre-planned Tracks
- 12 Editing the Map
- 13 Displays in the Multidisplay
- 14 Quick Info Box
- 15 Evaluation of the Radar Video
- 16 The Radar Keyboard
- 17 Alarm Management
- 18 List of Alarms
- 19 List of the Alarm Signal Outputs
- 20 Care and Maintenance Work
- 21 Performance Monitor
- 22 System Maintenance Manager
- 22.1 Determining the Versions of Software, Hardware and Documentation
- 22.2 Listing the System Faults
- 22.3 Off-Line Selfcheck
- 22.4 Checking / Correcting the Computer Time
- 22.5 Distribution and Deletion of Map Data; Data Saving
- 22.6 Exchanging Track Files between the Indicators; Data Saving
- 22.7 The Handling of Diskettes
- 22.8 Aborting and Restarting the Program of the Radar System
RADARPILOT / CHARTRADAR
ED 3038 G 232 / 01 (2002-06)
Operating Instructions
13 Displays in the Multidisplay
13.2 Zoom Display
b_r1_e31.fm / 21.06.02
100
WARNING:
The computation might be based on faulty data (e.g. the ship contour
being displayed, which does not necessarily have to correspond suffi-
ciently accurately to the actual contour, or the data of the navigation
sensors), and so this display can only serve as an overview, and not as
the sole docking aid.
Switching the Docking Display On/Off
Click on the MENU button. Then, in the USER SETTINGS menu,
click on the DOCKING button.
As a result of switching on, the docking position symbol is addition-
ally set at own ship’s position on the PPI.
At the same time, the Docking Display appears on the Multidisplay.
Specifying the Docking Position
Shifting: Click into the circle of the docking position symbol. Shift
the symbol by means of the trackball, and at the desired position
press the DO key. The symbol is kept at this geographical position.
Rotating: Click on the docking position symbol near to the circle
but outside it. Rotate the symbol by means of the trackball, and
when the desired direction is reached press the DO key.
Adapting the Docking Display to Suit the Actual Starboard/Port Situation
In the Docking Display, click on STBD or PORT.
13.2 Zoom Display
In modes North-Up and Course-Up, an enlarged video display of a PPI excerpt can be switched on. You
can specify whether the excerpt is to remain at a fixed position or is to be moved along together with a
target or with own ship’s position.
MENU
MENU
USER SETTINGS
1.DO
DOCKING
3.DO
2.DO
Docking position
symbol
STBD arrangement:
The distance and speed between the starboard side at own
ship’s bow and stern and the starboard side at the bow and
stern (respectively) of the docking position symbol
PORT arrangement:
The distance and speed between the port side at own ship’s
bow and stern and the port side at the bow and stern (respec-
tively) of the docking position symbol
STBD
Here, the arrangement in the Docking Display can be
adapted to suit the actual starboard/port situation.
DO
PORT