User's Manual

Table Of Contents
ED 3038 G 232 / 01 (2002-06)
Operating Instructions
16 The Radar Keyboard
b_r1se16.fm / 21.06.02
113
RADARPILOT / CHARTRADAR
16 The Radar Keyboard
Subjects of this Section:
Functions of the keys and rotary knobs on the optional
radar keyboard
The operating panel of the flat screen monitors AZ3056
and AZ3063
The radar keyboard is used to provide fast, convenient
access to those functions that are used frequently. When
this keyboard is used, the operating possibilities described
in the other sections of these operating instructions continue
to be available in full. Alternating operating actions are
possible at all times.
In the configuration described in these Operating
Instructions, the CONN MODE button has no function.
For Section 2.3,
Brilliance and Colour Selection
(see page 21):
Brilliance, Colour Selection
By pressing of the BRILL key, the BRILLIANCE menu is opened; then use the proce-
dure described in Section 2.3.
Setting the Illumination of the Keyboard
Press the BRILL key or click on the BRILL button. Then click on the
PANEL area, and use the trackball to make the desired setting. Then
press the DO key.
For Section 2.4,
Degaussing
(see page 23):
Degaussing
By pressing of the BRILL key, the BRILLIANCE menu is opened; then use the proce-
dure described in Section 2.4.
For Section 2.5,
Display Modes
(see page 24):
Only if there is a CHARTPILOT installed:
Switching the Radar Display Mode on
By pressing of the RADAR MODE key, the Radar Display Mode is switched on. The
radar PPI is displayed. In addition, a map can be displayed.
The green lamp above the key indicates this setting.
RADARPILOT ATLAS 1
000
BRILL
PANEL
BRILL
1.DO
90 %
4.DO
2.DO
3.
BRILL
RADAR
MODE