User's Manual
Table Of Contents
- General Safety Precautions
- List of Contents
- 1 Overview
- 2 Basic Settings; General Remarks about Operating
- 3 PPI Settings
- 3.1 Screen Stabilisation of the PPI: True Motion, Relative Motion
- 3.2 PPI Orientation: Head-Up, North-Up, Course-Up
- 3.3 Centering / Off-Centering of the Display (Center, Off-Center)
- 3.4 Range Selection (Range)
- 3.5 Range Rings, Grid
- 3.6 Own Ship Symbols and Target Symbols, Vectors, Past Position Plots
- 3.7 Trails
- 3.8 Setting the Display of Pre-planned Tracks
- 3.9 Defining the System Track and the Next Waypoint; System Track Display
- 3.10 Setting the Display of User Chart Objects on the RADARPILOT
- 3.11 Setting the Display of Charts and User Chart Objects on the CHARTRADAR
- 3.12 Setting the Display of the Map
- 3.13 Adjusting the Chart or Map to the Radar Video
- 4 Setting the Radar Function
- 4.1 Radar Function On/Off, Interswitch Functions, Master/Slave Switch-Over
- 4.2 Basic Setting of the Radar Video
- 4.3 Selection of the Antenna Revolution Rate
- 4.4 Radar Setting for High Speed of Own Vessel (HSC)
- 4.5 Radar Setting for the Display of RACON Codes
- 4.6 Radar Setting for SART Detection (X-Band only)
- 4.7 Suppression of the Synthetics and Video
- 5 Heading, Speed, Position
- 6 Bearing and Range
- 7 ARPA Functions
- 7.1 Symbols Used
- 7.2 Procedure of the Target Acquisition
- 7.3 Manual Target Acquisition
- 7.4 Automatic Target Acquisition; Settings of the Acquisition/Guard Zone
- 7.5 Deletion of Targets, Loss of Target
- 7.6 Target Data Display
- 7.7 Target Labels
- 7.8 Selecting the Reference Targets for Reference Target Tracking
- 8 EPA Functions (Electronic Plotting Aid)
- 9 Collision Avoidance (TCPA, CPA)
- 10 Trial Manoeuvres
- 11 Editing of Pre-planned Tracks
- 12 Editing the Map
- 13 Displays in the Multidisplay
- 14 Quick Info Box
- 15 Evaluation of the Radar Video
- 16 The Radar Keyboard
- 17 Alarm Management
- 18 List of Alarms
- 19 List of the Alarm Signal Outputs
- 20 Care and Maintenance Work
- 21 Performance Monitor
- 22 System Maintenance Manager
- 22.1 Determining the Versions of Software, Hardware and Documentation
- 22.2 Listing the System Faults
- 22.3 Off-Line Selfcheck
- 22.4 Checking / Correcting the Computer Time
- 22.5 Distribution and Deletion of Map Data; Data Saving
- 22.6 Exchanging Track Files between the Indicators; Data Saving
- 22.7 The Handling of Diskettes
- 22.8 Aborting and Restarting the Program of the Radar System
ED 3038 G 232 / 01 (2002-06)
Operating Instructions
2 Basic Settings; General Remarks about Operating
2.6 An Overview of the Screen
b_r1_e12.fm / 21.06.02
25
RADARPILOT / CHARTRADAR
2.6 An Overview of the Screen
The following illustration provides an overview of the arrangement of display elements and operating
elements on the screen in the Radar Display Mode and in the Chart Display Mode.
Transceiver settings:
stand-by/radar operation (p. 47)
master/slave (p. 48)
transceiver selection (p. 48)
radar video setting (p. 49)
antenna revolution rate (p. 52)
Radar PPI:
range selection (p. 31)
centering/off-centering (p. 31)
suppression of synthetics/radar video (p. 53)
Alarm limit values of colli-
sion avoidance (p. 77)
Radar target data (p. 70)
system track data (p. 39)
Alarm symbol for calling
up the existing warnings
(p. 118)
Quick Info Box (p. 105)
with further information:
ETA to cursor position
date, time, stop watch,
help function
PPI movement (p. 29)
Measurement aids:
Parallel Index Lines (p. 66)
VRM (p. 63)
EBL (p. 64)
Brightness setting (p. 21),
degaussing (p. 23)
Compass course (p. 57)
speed (p. 58)
Multidisplay:
Selectable display of:
alarm list (p. 119),
navigation sensor data (p. 58,
61),
trial manoeuvre (p. 79),
Zoom Display (p. 100),
Depth Display (p. 103),
Wind/Set+Drift display (p. 103),
Docking Display (p. 99),
EDIT TRACK menu (p. 85),
EDIT MAP menu (p. 93),
track lists/catalogs (p. 37)
Setting display
- of the map (p. 45)
- of the chart (p. 42)
- of the User Chart Objects
(p. 41 or 42)
editing maps (p. 93)
Acquiring targets (p. 69)
deleting targets (p. 70)
Setting
- display of the tracks (p. 37)
- system track (p. 39)
- next waypoint (p. 40)
editing tracks (p. 85)
PPI orientation (p. 30)
Switching on/off the acquisi-
tion/guard zone (p. 69)
Setting of
path prediction (p. 35)
trails (p. 36)
vectors (p. 34)
past plots (p. 34)
Menus for further
functions (p. 26)
Position display:
data of position sensor (p. 60):
system position, course and
speed over ground
or
cursor position (p. 63),