User's Manual
Table Of Contents
- General Safety Precautions
- List of Contents
- 1 Overview
- 2 Basic Settings; General Remarks about Operating
- 3 PPI Settings
- 3.1 Screen Stabilisation of the PPI: True Motion, Relative Motion
- 3.2 PPI Orientation: Head-Up, North-Up, Course-Up
- 3.3 Centering / Off-Centering of the Display (Center, Off-Center)
- 3.4 Range Selection (Range)
- 3.5 Range Rings, Grid
- 3.6 Own Ship Symbols and Target Symbols, Vectors, Past Position Plots
- 3.7 Trails
- 3.8 Setting the Display of Pre-planned Tracks
- 3.9 Defining the System Track and the Next Waypoint; System Track Display
- 3.10 Setting the Display of User Chart Objects on the RADARPILOT
- 3.11 Setting the Display of Charts and User Chart Objects on the CHARTRADAR
- 3.12 Setting the Display of the Map
- 3.13 Adjusting the Chart or Map to the Radar Video
- 4 Setting the Radar Function
- 4.1 Radar Function On/Off, Interswitch Functions, Master/Slave Switch-Over
- 4.2 Basic Setting of the Radar Video
- 4.3 Selection of the Antenna Revolution Rate
- 4.4 Radar Setting for High Speed of Own Vessel (HSC)
- 4.5 Radar Setting for the Display of RACON Codes
- 4.6 Radar Setting for SART Detection (X-Band only)
- 4.7 Suppression of the Synthetics and Video
- 5 Heading, Speed, Position
- 6 Bearing and Range
- 7 ARPA Functions
- 7.1 Symbols Used
- 7.2 Procedure of the Target Acquisition
- 7.3 Manual Target Acquisition
- 7.4 Automatic Target Acquisition; Settings of the Acquisition/Guard Zone
- 7.5 Deletion of Targets, Loss of Target
- 7.6 Target Data Display
- 7.7 Target Labels
- 7.8 Selecting the Reference Targets for Reference Target Tracking
- 8 EPA Functions (Electronic Plotting Aid)
- 9 Collision Avoidance (TCPA, CPA)
- 10 Trial Manoeuvres
- 11 Editing of Pre-planned Tracks
- 12 Editing the Map
- 13 Displays in the Multidisplay
- 14 Quick Info Box
- 15 Evaluation of the Radar Video
- 16 The Radar Keyboard
- 17 Alarm Management
- 18 List of Alarms
- 19 List of the Alarm Signal Outputs
- 20 Care and Maintenance Work
- 21 Performance Monitor
- 22 System Maintenance Manager
- 22.1 Determining the Versions of Software, Hardware and Documentation
- 22.2 Listing the System Faults
- 22.3 Off-Line Selfcheck
- 22.4 Checking / Correcting the Computer Time
- 22.5 Distribution and Deletion of Map Data; Data Saving
- 22.6 Exchanging Track Files between the Indicators; Data Saving
- 22.7 The Handling of Diskettes
- 22.8 Aborting and Restarting the Program of the Radar System
RADARPILOT / CHARTRADAR
ED 3038 G 232 / 01 (2002-06)
Operating Instructions
8 EPA Functions (Electronic Plotting Aid)
8.2 Deletion of Targets
b_r1_e26.fm / 21.06.02
76
Continuing the Plotting of a Target
30 seconds at the earliest after a plot has been set, another plot
can be set for the same target:
Click on the target symbol by means of the MORE key, and then
(with the DO key) click on SET NEXT PLOT and on the target
video.
Deleting the Last Plot
If a plot is to be corrected, it must first be deleted within 30
seconds after setting of the plot.
Click on the target symbol by means of the MORE key, and then
(with the DO key) click on DELETE LAST PLOT.
8.2 Deletion of Targets
Deletion of one target or of all targets is performed as described in Section 7.5 on page 70.
8.3 Target Data Display
The target data display does not differ from that of the ARPA
radar - see Section 7.6 on page 70. In addition, the time since the
setting of the last plot is displayed behind PLTIME.
8.4 Target Labels
As far as the target labels are concerned, the only difference is that, in the case of the EPA radar, the
display of the target label is generally in the switched-on state at first, and if necessary it can be switched
off in the USER SETTINGS menu, whereas in the case of the ARPA radar the general display of the
target label has to be switched on in the USER SETTINGS menu if necessary - see Section 7.7 on page
72.
SHOW LABEL
DISPLAY DATA
DELETE TARGET
SET NEXT PLOT
1.MORE
2.DO
ZOOM FIXED ON TARGET
DISPLAY DATA
DELETE TARGET
DELETE LAST PLOT
1.MORE
2.DO
ZOOM FIXED ON TARGET
SHOW LABEL
BCR
BCT
CPA
1.78
6:34
0.46
NM
NM
min
0.13
4:09
0.20
PLTIME
8:33
min
1:43