User's Manual

RADARPILOT / CHARTRADAR
ED 3038 G 232 / 01 (2002-06)
Operating Instructions
12 Editing the Map
12.3 Editing of Lines
b_r1_e30.fm / 21.06.02
96
12.3 Editing of Lines
Lines are inserted by entering the line points one after another. These are thin, white, continuous lines.
Existing lines can be lengthened or deleted. On these lines, line points can be inserted, moved or deleted.
Inserting a New Line
1. Set the SYMBOL/LINE button to LINE.
2. Select the editing function NEW.
3. Set the starting point of the line by clicking on the PPI, or
input the insertion position numerically (see page 95).
☞ Each further clicking action sets the next point of the line.
Lengthening a Line
1. Select the editing function CONTINUE.
2. On the PPI, click on the starting point or end point of the
line.
3. Click on the insertion position.
☞ Each further clicking action sets the next point of the line.
Inserting a Point on a Line
1. Select the editing function INSERT.
2. Click on the line between the points where a point is to be
inserted.
3. Click on the position of the new point.
☞ Begin the next insertion by means of step 2.
Moving a Point of a line
1. Select the editing function MOVE.
2. On the PPI, click on the point that is to be moved.
3. Click on the new position.
☞ Begin the next insertion by means of step 2.
Deleting a Point on a Line
1. Select the editing function DELETE.
2. On the PPI, click on the point that is to be deleted.
☞ Each clicking action on another point of the line deletes
that point.
1.DO
2.DO
NEW
LINE
COAST LINE
EDIT MAP
NEW
CONTINUE
MOVE
DELETE
DELETE ALL
INSERT
NEW
CONTINUE
MOVE
DELETE
DELETE ALL
INSERT
NEW
CONTINUE
MOVE
DELETE
DELETE ALL
INSERT
NEW
CONTINUE
MOVE
DELETE
DELETE ALL
INSERT