User's Manual
Table Of Contents
- General Safety Precautions
- List of Contents
- 1 Overview
- 2 Basic Settings; General Remarks about Operating
- 3 PPI Settings
- 3.1 Screen Stabilisation of the PPI: True Motion, Relative Motion
- 3.2 PPI Orientation: Head-Up, North-Up, Course-Up
- 3.3 Centering / Off-Centering of the Display (Center, Off-Center)
- 3.4 Range Selection (Range)
- 3.5 Range Rings, Grid
- 3.6 Own Ship Symbols and Target Symbols, Vectors, Past Position Plots
- 3.7 Trails
- 3.8 Setting the Display of Pre-planned Tracks
- 3.9 Defining the System Track and the Next Waypoint; System Track Display
- 3.10 Setting the Display of User Chart Objects on the RADARPILOT
- 3.11 Setting the Display of Charts and User Chart Objects on the CHARTRADAR
- 3.12 Setting the Display of the Map
- 3.13 Adjusting the Chart or Map to the Radar Video
- 4 Setting the Radar Function
- 4.1 Radar Function On/Off, Interswitch Functions, Master/Slave Switch-Over
- 4.2 Basic Setting of the Radar Video
- 4.3 Selection of the Antenna Revolution Rate
- 4.4 Radar Setting for High Speed of Own Vessel (HSC)
- 4.5 Radar Setting for the Display of RACON Codes
- 4.6 Radar Setting for SART Detection (X-Band only)
- 4.7 Suppression of the Synthetics and Video
- 5 Heading, Speed, Position
- 6 Bearing and Range
- 7 ARPA Functions
- 7.1 Symbols Used
- 7.2 Procedure of the Target Acquisition
- 7.3 Manual Target Acquisition
- 7.4 Automatic Target Acquisition; Settings of the Acquisition/Guard Zone
- 7.5 Deletion of Targets, Loss of Target
- 7.6 Target Data Display
- 7.7 Target Labels
- 7.8 Selecting the Reference Targets for Reference Target Tracking
- 8 EPA Functions (Electronic Plotting Aid)
- 9 Collision Avoidance (TCPA, CPA)
- 10 Trial Manoeuvres
- 11 Editing of Pre-planned Tracks
- 12 Editing the Map
- 13 Displays in the Multidisplay
- 14 Quick Info Box
- 15 Evaluation of the Radar Video
- 16 The Radar Keyboard
- 17 Alarm Management
- 18 List of Alarms
- 19 List of the Alarm Signal Outputs
- 20 Care and Maintenance Work
- 21 Performance Monitor
- 22 System Maintenance Manager
- 22.1 Determining the Versions of Software, Hardware and Documentation
- 22.2 Listing the System Faults
- 22.3 Off-Line Selfcheck
- 22.4 Checking / Correcting the Computer Time
- 22.5 Distribution and Deletion of Map Data; Data Saving
- 22.6 Exchanging Track Files between the Indicators; Data Saving
- 22.7 The Handling of Diskettes
- 22.8 Aborting and Restarting the Program of the Radar System
RADARPILOT / CHARTRADAR
ED 3038 G 232 / 01 (2002-06)
Operating Instructions
2 Basic Settings; General Remarks about Operating
2.5 Display Modes
b_r1_e12.fm / 21.06.02
24
2.5 Display Modes
If there is a CHARTPILOT connected, two Display Modes are available on the RADARPILOT:
- Radar Display Mode: PPI with all radar and ARPA or EPA functions. The map edited on the radar
as per Section 12 can be displayed - see Section 3.12.
- Chart Display Mode: PPI with all radar and ARPA or EPA functions. Instead of the map, the User
Chart Objects that exist in the CHARTPILOT can be displayed - see Section 3.10.
On the CHARTRADAR, the Chart Display Mode has a significantly extended functionality: in addition to
the User Chart Objects, the vector charts that are present on the CHARTPILOT can be displayed also -
see Section 3.11.
1)
Switch-Over of the Display Modes
Switch-over is performed by means of the keys RADAR and
CHART . The lamp above the keys indicates the Display Mode
that is currently switched on.
Alternatively, switch-over can be performed by means of
buttons: on the display, click on the MENU button, and then
click on the desired mode button.
☞ When Radar Display Mode is switched on, the button
beside the MENU button is called MAP; when Chart
Display Mode is switched on, the name changes to
CHART.
1)
In the case of a CHARTRADAR configured as per IEC 60936-3 (see footnote on page 9), while Head-Up Mode is switched on, the display
of the chart is not permissible. While Head-Up Mode is switched on, it is not possible to switch over to Chart Display Mode.
MENU
1.DO
2.DO
MENU
UTILITIES...
USER SETTINGS...
MAINTENANCE
CHARTRADAR
MODE