User's Manual

ManualsBrandsSAM Electronics ManualsElectronicsMarine Radar

Table Of Contents

General Safety Precautions
List of Contents
1 Overview
- 1.1 RADARPILOT ATLAS 1000
- 1.2 CHARTRADAR ATLAS 1000
- 1.3 MULTIPILOT ATLAS 1000
- 1.4 The Equipment Components
- 1.5 Scope of Applicability of these Operating Instructions
2 Basic Settings; General Remarks about Operating
- 2.1 Switching the Radar System On and Off
- 2.2 General Remarks about the Operating and Display Elements
- 2.3 Brilliance and Colour Selection
- 2.4 Degaussing
- 2.5 Display Modes
- 2.6 An Overview of the Screen
- 2.7 The Menu Structure
- 2.8 Activating/Deactivating of Slave Keyboards/Trackballs
3 PPI Settings
- 3.1 Screen Stabilisation of the PPI: True Motion, Relative Motion
- 3.2 PPI Orientation: Head-Up, North-Up, Course-Up
- 3.3 Centering / Off-Centering of the Display (Center, Off-Center)
- 3.4 Range Selection (Range)
- 3.5 Range Rings, Grid
- 3.6 Own Ship Symbols and Target Symbols, Vectors, Past Position Plots
- 3.7 Trails
- 3.8 Setting the Display of Pre-planned Tracks
- 3.9 Defining the System Track and the Next Waypoint; System Track Display
- 3.10 Setting the Display of User Chart Objects on the RADARPILOT
- 3.11 Setting the Display of Charts and User Chart Objects on the CHARTRADAR
- 3.12 Setting the Display of the Map
- 3.13 Adjusting the Chart or Map to the Radar Video
4 Setting the Radar Function
- 4.1 Radar Function On/Off, Interswitch Functions, Master/Slave Switch-Over
- 4.2 Basic Setting of the Radar Video
- 4.3 Selection of the Antenna Revolution Rate
- 4.4 Radar Setting for High Speed of Own Vessel (HSC)
- 4.5 Radar Setting for the Display of RACON Codes
- 4.6 Radar Setting for SART Detection (X-Band only)
- 4.7 Suppression of the Synthetics and Video
5 Heading, Speed, Position
- 5.1 Compass
- 5.2 Speed Sensor
- 5.3 Position Sensor
6 Bearing and Range
- 6.1 Cursor Display
- 6.2 Variable Range Markers (VRM's)
- 6.3 Electronic Bearing Lines (EBL's)
- 6.4 Operating the VRM and the EBL Jointly
- 6.5 Parallel Index Lines
7 ARPA Functions
- 7.1 Symbols Used
- 7.2 Procedure of the Target Acquisition
- 7.3 Manual Target Acquisition
- 7.4 Automatic Target Acquisition; Settings of the Acquisition/Guard Zone
- 7.5 Deletion of Targets, Loss of Target
- 7.6 Target Data Display
- 7.7 Target Labels
- 7.8 Selecting the Reference Targets for Reference Target Tracking
8 EPA Functions (Electronic Plotting Aid)
- 8.1 Manual Target Acquisition and Semi-Automatic Plotting
- 8.2 Deletion of Targets
- 8.3 Target Data Display
- 8.4 Target Labels
9 Collision Avoidance (TCPA, CPA)
10 Trial Manoeuvres
- 10.1 General
- 10.2 Switch-On of the Trial Manoeuvre Display
- 10.3 Setting the Trial Manoeuvre in Relative Display Mode
- 10.4 Checking the Trial Manoeuvre in True Display Mode
- 10.5 Switching Off the Trial Manoeuvre Display
11 Editing of Pre-planned Tracks
- 11.1 Generating a New Pre-planned Track
- 11.2 Modifying an Existing Track
- 11.3 Generating a New Track on the Basis of an Existing Track
- 11.4 Managing the Pre-planned Tracks
12 Editing the Map
- 12.1 Preparing the Editing of the Map
- 12.2 Editing of Symbols
- 12.3 Editing of Lines
- 12.4 Ending the Editing of a Map
13 Displays in the Multidisplay
- 13.1 Docking Display
- 13.2 Zoom Display
- 13.3 Depth Display
- 13.4 Wind/Set+Drift Display
14 Quick Info Box
- 14.1 Contents of the Quick Info Box
- 14.2 Operating Procedure for the Stopwatch
- 14.3 Setting the Zone Time
15 Evaluation of the Radar Video
- 15.1 Achievable Radar Range
- 15.2 Distortions of the Radar Video
- 15.3 Undesirable Echo Displays and Effects
- 15.4 Sector Blanking
16 The Radar Keyboard
17 Alarm Management
18 List of Alarms
19 List of the Alarm Signal Outputs
20 Care and Maintenance Work
- 20.1 Care
- 20.2 Maintenance Work
21 Performance Monitor
22 System Maintenance Manager
- 22.1 Determining the Versions of Software, Hardware and Documentation
- 22.2 Listing the System Faults
- 22.3 Off-Line Selfcheck
- 22.4 Checking / Correcting the Computer Time
- 22.5 Distribution and Deletion of Map Data; Data Saving
- 22.6 Exchanging Track Files between the Indicators; Data Saving
- 22.7 The Handling of Diskettes
- 22.8 Aborting and Restarting the Program of the Radar System

ED 3038 G 232 / 01 (2002-06)

Operating Instructions

2 Basic Settings; General Remarks about Operating

2.7 The Menu Structure

b_r1_e12.fm / 21.06.02

RADARPILOT / CHARTRADAR

MAP

Page 93

Page 45

Page 41

In Radar Display Mode

In Chart Display Mode

When the Display Modes

are switched over, the

button changes its name

Present only if there is a

CHARTPILOT installed

CHART

USER CHART OBJECTS

SIMPLIFIED

SYMBOLS

TEXT LABELS

AREAS FILLED

CHART

Page 41

(on the RADARPILOT and

on the CHARTRADAR)

on the RADARPILOT

on the CHARTRADAR

In Chart Display Mode

CHART

EDIT MAP...

Service Stations

VISIBILITY GROUPS

EDIT MAP...

Standard Land Features

EDIT MAP...

Other Land Features

EDIT MAP...

Shallow Soundings

EDIT MAP...

Cautionary Area

EDIT MAP...

Information Areas

EDIT MAP...

Light/Fog Signals

EDIT MAP...

Pilot Signal Stations

CHART

VISIBILITY GROUPS...

USER CHART OBJECTS

SIMPLIFIED

C-MAP

SYMBOLS

CHART

VIDEO ON TOP

STANDARD