User's Manual
Table Of Contents
- General Safety Precautions
- List of Contents
- 1 Overview
- 2 Basic Settings; General Remarks about Operating
- 3 PPI Settings
- 3.1 Screen Stabilisation of the PPI: True Motion, Relative Motion
- 3.2 PPI Orientation: Head-Up, North-Up, Course-Up
- 3.3 Centering / Off-Centering of the Display (Center, Off-Center)
- 3.4 Range Selection (Range)
- 3.5 Range Rings, Grid
- 3.6 Own Ship Symbols and Target Symbols, Vectors, Past Position Plots
- 3.7 Trails
- 3.8 Setting the Display of Pre-planned Tracks
- 3.9 Defining the System Track and the Next Waypoint; System Track Display
- 3.10 Setting the Display of User Chart Objects on the RADARPILOT
- 3.11 Setting the Display of Charts and User Chart Objects on the CHARTRADAR
- 3.12 Setting the Display of the Map
- 3.13 Adjusting the Chart or Map to the Radar Video
- 4 Setting the Radar Function
- 4.1 Radar Function On/Off, Interswitch Functions, Master/Slave Switch-Over
- 4.2 Basic Setting of the Radar Video
- 4.3 Selection of the Antenna Revolution Rate
- 4.4 Radar Setting for High Speed of Own Vessel (HSC)
- 4.5 Radar Setting for the Display of RACON Codes
- 4.6 Radar Setting for SART Detection (X-Band only)
- 4.7 Suppression of the Synthetics and Video
- 5 Heading, Speed, Position
- 6 Bearing and Range
- 7 ARPA Functions
- 7.1 Symbols Used
- 7.2 Procedure of the Target Acquisition
- 7.3 Manual Target Acquisition
- 7.4 Automatic Target Acquisition; Settings of the Acquisition/Guard Zone
- 7.5 Deletion of Targets, Loss of Target
- 7.6 Target Data Display
- 7.7 Target Labels
- 7.8 Selecting the Reference Targets for Reference Target Tracking
- 8 EPA Functions (Electronic Plotting Aid)
- 9 Collision Avoidance (TCPA, CPA)
- 10 Trial Manoeuvres
- 11 Editing of Pre-planned Tracks
- 12 Editing the Map
- 13 Displays in the Multidisplay
- 14 Quick Info Box
- 15 Evaluation of the Radar Video
- 16 The Radar Keyboard
- 17 Alarm Management
- 18 List of Alarms
- 19 List of the Alarm Signal Outputs
- 20 Care and Maintenance Work
- 21 Performance Monitor
- 22 System Maintenance Manager
- 22.1 Determining the Versions of Software, Hardware and Documentation
- 22.2 Listing the System Faults
- 22.3 Off-Line Selfcheck
- 22.4 Checking / Correcting the Computer Time
- 22.5 Distribution and Deletion of Map Data; Data Saving
- 22.6 Exchanging Track Files between the Indicators; Data Saving
- 22.7 The Handling of Diskettes
- 22.8 Aborting and Restarting the Program of the Radar System
RADARPILOT / CHARTRADAR
ED 3038 G 232 / 01 (2002-06)
Operating Instructions
3 PPI Settings
3.9 Defining the System Track and the Next Waypoint; System Track Display
b_r1_e21.fm / 21.06.02
40
☞ If the System Track display is covered over by the target data display, it can be brought back into
the foreground by clicking on the OTHER button and TRACK DATA.
(The OTHER button appears in miniaturised form in the top left-hand corner of the target data or
System Track data as soon as the cursor is situated in this data area and there is no menu opened
there. It is displayed in normal form as soon as the cursor is situated in the area of the normal
display of the OTHER button - see also
Switching the Displays On and Off
on page 99.)
Defining the Next Waypoint
In order to display the path leading to the System Track, it is
necessary to specify the waypoint at which that path meets the
System Track. That waypoint is called the "Next Waypoint".
1. Click on the TRACK button and then on the SELECT
NEXT WPT button situated under SYSTEM TRACK. As a
result, the waypoint list of the System Track appears and
the according data displays are cleared.
2. By clicking, mark the waypoint that is to be approached,
and click on the SELECT button.
Cancelling the Definition of the System Track
If a System Track is already defined but is to be deselected:
Click on the TRACK button and then on the CANCEL button
situated under SYSTEM TRACK. As a result, the definition of
the System Track is cancelled.
Next Waypoint
HANSTHOLM
FRIESLAND
No.
/ATLANTIC/1301
CLOSE
GAS FIELD
KATTEGATT
BUOY 11
KUMMELBANKE
Name
41
42
43
37
36
38
2b.DO
SELECT
SKAGERAK
2a.DO
DEAP SEA PILOT
40
39
TRACK
1a. DO
1b.DO
TRACK
SELECT NEXT WPT...
SET...
SYSTEM TRACK
CANCEL
Waypoint No. 39 has been defined
as the Next Waypoint. The approach
track leading to this waypoint
(including the Wheel Over Point and
curve) is displayed additionally.
39
38
Pre-planned Track
2.DO
TRACK
1.DO
TRACK
SELECT NEXT WPT...
SET...
SYSTEM TRACK
CANCEL