User's Manual
Table Of Contents
- General Safety Precautions
- List of Contents
- 1 Overview
- 2 Basic Settings; General Remarks about Operating
- 3 PPI Settings
- 3.1 Screen Stabilisation of the PPI: True Motion, Relative Motion
- 3.2 PPI Orientation: Head-Up, North-Up, Course-Up
- 3.3 Centering / Off-Centering of the Display (Center, Off-Center)
- 3.4 Range Selection (Range)
- 3.5 Range Rings, Grid
- 3.6 Own Ship Symbols and Target Symbols, Vectors, Past Position Plots
- 3.7 Trails
- 3.8 Setting the Display of Pre-planned Tracks
- 3.9 Defining the System Track and the Next Waypoint; System Track Display
- 3.10 Setting the Display of User Chart Objects on the RADARPILOT
- 3.11 Setting the Display of Charts and User Chart Objects on the CHARTRADAR
- 3.12 Setting the Display of the Map
- 3.13 Adjusting the Chart or Map to the Radar Video
- 4 Setting the Radar Function
- 4.1 Radar Function On/Off, Interswitch Functions, Master/Slave Switch-Over
- 4.2 Basic Setting of the Radar Video
- 4.3 Selection of the Antenna Revolution Rate
- 4.4 Radar Setting for High Speed of Own Vessel (HSC)
- 4.5 Radar Setting for the Display of RACON Codes
- 4.6 Radar Setting for SART Detection (X-Band only)
- 4.7 Suppression of the Synthetics and Video
- 5 Heading, Speed, Position
- 6 Bearing and Range
- 7 ARPA Functions
- 7.1 Symbols Used
- 7.2 Procedure of the Target Acquisition
- 7.3 Manual Target Acquisition
- 7.4 Automatic Target Acquisition; Settings of the Acquisition/Guard Zone
- 7.5 Deletion of Targets, Loss of Target
- 7.6 Target Data Display
- 7.7 Target Labels
- 7.8 Selecting the Reference Targets for Reference Target Tracking
- 8 EPA Functions (Electronic Plotting Aid)
- 9 Collision Avoidance (TCPA, CPA)
- 10 Trial Manoeuvres
- 11 Editing of Pre-planned Tracks
- 12 Editing the Map
- 13 Displays in the Multidisplay
- 14 Quick Info Box
- 15 Evaluation of the Radar Video
- 16 The Radar Keyboard
- 17 Alarm Management
- 18 List of Alarms
- 19 List of the Alarm Signal Outputs
- 20 Care and Maintenance Work
- 21 Performance Monitor
- 22 System Maintenance Manager
- 22.1 Determining the Versions of Software, Hardware and Documentation
- 22.2 Listing the System Faults
- 22.3 Off-Line Selfcheck
- 22.4 Checking / Correcting the Computer Time
- 22.5 Distribution and Deletion of Map Data; Data Saving
- 22.6 Exchanging Track Files between the Indicators; Data Saving
- 22.7 The Handling of Diskettes
- 22.8 Aborting and Restarting the Program of the Radar System
ED 3038 G 232 / 01 (2002-06)
Operating Instructions
7 ARPA Functions
7.6 Target Data Display
b_r1_e25.fm / 21.06.02
71
RADARPILOT / CHARTRADAR
Switching Off the Target Data Display of Individual Targets
When you click on a target which is marked with the symbol , this switches off the display of its data.
Switch-Over of the Display
Where the target data are displayed, the System Track data can also be displayed. Furthermore, the
menus opened by means of the buttons MENU to BRILL appear there.
Regardless of the present display, the target data display appears as soon as a target for which the data
display has not yet been switched on (a target not yet marked with the symbol ) is clicked in the PPI.
Furthermore, the target data display appears when a target becomes a dangerous target.
After clicking on the OTHER button, the switch-over possibilities are listed in the context menu. With the
8 Targets button, the CPA-TCPA display is brought into the foreground; with the 2 Targets button, the
Overall Display is brought into the foreground.
☞ The OTHER button appears in miniaturised form in the top right-hand corner of the target data or
System Track data as soon as the cursor is situated in this data area and there is no menu opened
there. It is displayed in normal form as soon as the cursor is situated in the area of the normal
display of the OTHER button (see also
Switching the Displays On and Off
on page 99).
☞ When you click on the last target whose data are being displayed, this switches off the target data
display.
CPA-TCPA Display
The following data of the selected 8 (max) targets are displayed:
CPA Closest Point of Approach
TCPA Time to Closest Point of Approach
Overall Display
The following data of the selected 2 (max) targets are displayed:
ID (= identifier) The target label
RNG (= range) The range of the target
BRG (= bearing) The bearing of the target
SPD (= speed) Speed;
with prefix T (= true): speed over ground / through the
water;
with prefix R (= relative): speed relative to your own ship
CSE (= course);
with prefix T (= true): course over ground / through the
water;
with prefix R (= relative): course relative to your own ship
TCPA (= time to closest point of approach) The time up until the closest point of approach
CPA (= closest point of approach) The distance at the closest point of approach
BCT (= bow crossing time) The time that will pass before the target crosses the heading line of your
own ship
BCR (= bow crossing range) The range of the point on own ship’s heading line at which the target
will cross that line
CPA
TCPA
2.27 NM
4:28 min
6.79 NM
10:03 min
3.67 NM
8:15 min
12.59 NM
25:33 min
0.479 NM
4:28 min
ID
13
9
1
SIRIUS
12
ID
BCR
21.1
BCT
3.50
CPA
190.0
TCPA
19.8
T SPD
14:20
T CSE
1.78
RNG
6:34
BRG
0.46
NM
min
kt
°
NM
NM
°
min
57.9
2.01
217.6
21.1
4:29
0.13
4:09
0.20
13
9