User's Manual
Table Of Contents
- General Safety Precautions
- List of Contents
- 1 Overview
- 2 Basic Settings; General Remarks about Operating
- 3 PPI Settings
- 3.1 Screen Stabilisation of the PPI: True Motion, Relative Motion
- 3.2 PPI Orientation: Head-Up, North-Up, Course-Up
- 3.3 Centering / Off-Centering of the Display (Center, Off-Center)
- 3.4 Range Selection (Range)
- 3.5 Range Rings, Grid
- 3.6 Own Ship Symbols and Target Symbols, Vectors, Past Position Plots
- 3.7 Trails
- 3.8 Setting the Display of Pre-planned Tracks
- 3.9 Defining the System Track and the Next Waypoint; System Track Display
- 3.10 Setting the Display of User Chart Objects on the RADARPILOT
- 3.11 Setting the Display of Charts and User Chart Objects on the CHARTRADAR
- 3.12 Setting the Display of the Map
- 3.13 Adjusting the Chart or Map to the Radar Video
- 4 Setting the Radar Function
- 4.1 Radar Function On/Off, Interswitch Functions, Master/Slave Switch-Over
- 4.2 Basic Setting of the Radar Video
- 4.3 Selection of the Antenna Revolution Rate
- 4.4 Radar Setting for High Speed of Own Vessel (HSC)
- 4.5 Radar Setting for the Display of RACON Codes
- 4.6 Radar Setting for SART Detection (X-Band only)
- 4.7 Suppression of the Synthetics and Video
- 5 Heading, Speed, Position
- 6 Bearing and Range
- 7 ARPA Functions
- 7.1 Symbols Used
- 7.2 Procedure of the Target Acquisition
- 7.3 Manual Target Acquisition
- 7.4 Automatic Target Acquisition; Settings of the Acquisition/Guard Zone
- 7.5 Deletion of Targets, Loss of Target
- 7.6 Target Data Display
- 7.7 Target Labels
- 7.8 Selecting the Reference Targets for Reference Target Tracking
- 8 EPA Functions (Electronic Plotting Aid)
- 9 Collision Avoidance (TCPA, CPA)
- 10 Trial Manoeuvres
- 11 Editing of Pre-planned Tracks
- 12 Editing the Map
- 13 Displays in the Multidisplay
- 14 Quick Info Box
- 15 Evaluation of the Radar Video
- 16 The Radar Keyboard
- 17 Alarm Management
- 18 List of Alarms
- 19 List of the Alarm Signal Outputs
- 20 Care and Maintenance Work
- 21 Performance Monitor
- 22 System Maintenance Manager
- 22.1 Determining the Versions of Software, Hardware and Documentation
- 22.2 Listing the System Faults
- 22.3 Off-Line Selfcheck
- 22.4 Checking / Correcting the Computer Time
- 22.5 Distribution and Deletion of Map Data; Data Saving
- 22.6 Exchanging Track Files between the Indicators; Data Saving
- 22.7 The Handling of Diskettes
- 22.8 Aborting and Restarting the Program of the Radar System
RADARPILOT / CHARTRADAR
ED 3038 G 232 / 01 (2002-06)
Operating Instructions
11 Editing of Pre-planned Tracks
11.1 Generating a New Pre-planned Track
b_r1_e29.fm / 21.06.02
86
11.1 Generating a New Pre-planned Track
Input of Management Data
1. First of all, it is necessary to define which catalog the track is to be stored in, and under which
number:
Defining the track number and the catalog: In the TRACK menu, click on the LOAD button, then
click on the desired catalog and see which track number is not yet being used. Close the Load
Track(s) list by means of CLOSE.
2. Calling up the EDIT TRACK menu: In the TRACK
menu, open the Edit Track list by means of the EDIT
button.
☞ All of the tracks loaded are listed there. Tracks are
loaded by calling them up for display - see page 37.
Let the marker remain at <NEW>, and open the EDIT
TRACK menu by clicking on the EDIT button.
3. Inputting the track number: In the small field behind
EDIT TRACK, enter the number of the track.
4. Specifying the catalog: Click into the CATALOG field;
in the Catalog list which then opens, mark the desired
catalog and click on SELECT.
5. Inputting the track name: It is entered in the TRACK
field.
The EDIT TRACK Menu
Waypoint Data
Each waypoint has the following parameters:
- Number of the waypoint. This identifies the waypoint, is allocated consecutively within the track,
and can be displayed in the PPI.
- Name of the waypoint. This appears in the waypoint list when the Next Waypoint is being defined;
see page 40. This entry is not obligatory.
Edit Track
No.
CLOSE
Name
EDIT
3a. DO
3b. DO
< NEW >
BRIXAM-MIAMI 5
BRIXAM-MIAMI 2
BRIXAM-FREEPORT
1306
1305
1304
CLOSE
CATALOG
EDIT TRACK
1.00 NM
LAT
STORE
LON
RHUMB LINE
WPT
1
APPLY
054:11.000 N
012:08.575 E
NEW
Waypoint data
Aborting of editing;
no saving of the entries
Ending the editing properly;
entries are saved
Management data
Defining the waypoint
position numerically
Editing function; this is
activated (flashing) by
clicking, and is selected with
the MORE key.
Track Control Mode
Sailing Mode
Curve radius
Number and name of
the waypoint
Catalog
Number and name of the track
Position of the waypoint
TRACK
RADIUS
TO WAYPOINT