User's Manual
Table Of Contents
- General Safety Precautions
- List of Contents
- 1 Overview
- 2 Basic Settings; General Remarks about Operating
- 3 PPI Settings
- 3.1 Screen Stabilisation of the PPI: True Motion, Relative Motion
- 3.2 PPI Orientation: Head-Up, North-Up, Course-Up
- 3.3 Centering / Off-Centering of the Display (Center, Off-Center)
- 3.4 Range Selection (Range)
- 3.5 Range Rings, Grid
- 3.6 Own Ship Symbols and Target Symbols, Vectors, Past Position Plots
- 3.7 Trails
- 3.8 Setting the Display of Pre-planned Tracks
- 3.9 Defining the System Track and the Next Waypoint; System Track Display
- 3.10 Setting the Display of User Chart Objects on the RADARPILOT
- 3.11 Setting the Display of Charts and User Chart Objects on the CHARTRADAR
- 3.12 Setting the Display of the Map
- 3.13 Adjusting the Chart or Map to the Radar Video
- 4 Setting the Radar Function
- 4.1 Radar Function On/Off, Interswitch Functions, Master/Slave Switch-Over
- 4.2 Basic Setting of the Radar Video
- 4.3 Selection of the Antenna Revolution Rate
- 4.4 Radar Setting for High Speed of Own Vessel (HSC)
- 4.5 Radar Setting for the Display of RACON Codes
- 4.6 Radar Setting for SART Detection (X-Band only)
- 4.7 Suppression of the Synthetics and Video
- 5 Heading, Speed, Position
- 6 Bearing and Range
- 7 ARPA Functions
- 7.1 Symbols Used
- 7.2 Procedure of the Target Acquisition
- 7.3 Manual Target Acquisition
- 7.4 Automatic Target Acquisition; Settings of the Acquisition/Guard Zone
- 7.5 Deletion of Targets, Loss of Target
- 7.6 Target Data Display
- 7.7 Target Labels
- 7.8 Selecting the Reference Targets for Reference Target Tracking
- 8 EPA Functions (Electronic Plotting Aid)
- 9 Collision Avoidance (TCPA, CPA)
- 10 Trial Manoeuvres
- 11 Editing of Pre-planned Tracks
- 12 Editing the Map
- 13 Displays in the Multidisplay
- 14 Quick Info Box
- 15 Evaluation of the Radar Video
- 16 The Radar Keyboard
- 17 Alarm Management
- 18 List of Alarms
- 19 List of the Alarm Signal Outputs
- 20 Care and Maintenance Work
- 21 Performance Monitor
- 22 System Maintenance Manager
- 22.1 Determining the Versions of Software, Hardware and Documentation
- 22.2 Listing the System Faults
- 22.3 Off-Line Selfcheck
- 22.4 Checking / Correcting the Computer Time
- 22.5 Distribution and Deletion of Map Data; Data Saving
- 22.6 Exchanging Track Files between the Indicators; Data Saving
- 22.7 The Handling of Diskettes
- 22.8 Aborting and Restarting the Program of the Radar System
RADARPILOT / CHARTRADAR
ED 3038 G 232 / 01 (2002-06)
Operating Instructions
12 Editing the Map
12.2 Editing of Symbols
b_r1_e30.fm / 21.06.02
94
Selecting the Editing Function of the Cursor
If, with the MORE key, you click on the button which
displays the word NEW when the EDIT MAP menu is
switched on, a context menu opens, showing a list of all
editing functions of the cursor. Click on the desired function.
12.2 Editing of Symbols
Symbols can be inserted, moved or deleted.
Before a symbol is inserted, it must be defined. It can then be inserted by numeric input of the insertion
position or by clicking at the position on the PPI.
Defining can be done by selecting the symbol meaning or by graphic selection.
Defining the Symbol to be Inserted by Selecting its
Meaning
1. Set the SYMBOL/LINE button to SYMBOL.
2. In the button situated below that, select the symbol.
☞ All symbols that can be edited are listed.
3. If the symbol can be supplemented by the addition of
elements, one of these elements is shown in the button
situated below that. Correct the element if necessary.
☞ The symbol defined in this way is displayed in the
graphics field.
4. Select the editing function NEW.
Selecting Graphically the Symbol to be Inserted
1. Set the SYMBOL/LINE button to SYMBOL.
2. Click into the graphics field and click on the desired
symbol.
☞ The meaning of the selected symbol is displayed
in the text fields.
All symbols that can be edited are shown.
3. Select the editing function NEW.
1.MORE
NEW
SYMBOL
BUOY, LATERAL
EDIT MAP
NEW
MOVE
DELETE
NEW
CONTINUE
MOVE
DELETE
DELETE ALL
Editing functions of the
cursor for symbols
INSERT
Editing functions of
the cursor for lines
2.DO
MOVE
SYMBOL
BUOY, LATERAL
EDIT MAP
1.DO
2.DO
3.DO
4.DO
LAT
LON
55: 35.285 N
008:36. 437 W
CLOSE
APPLY
NEW
SYMBOL
STARBOARDHAND
BUOY, LATERAL
EDIT MAP
AT POSITION
1.DO
2.DO
NEW
SYMBOL
STARBOARDHAND
BUOY, LATERAL
EDIT MAP
3.DO