User's Manual
Table Of Contents
- GENERAL
- 1 About these Operating Instructions
- 2 Safety Precautions
- 3 NACOS Platinum System Description
- 4 Multi Function Display
- 5 NACOS Platinum Graphical User Interface
- QUICK START GUIDE
- MAIN APPLICATIONS
- RADAR
- 1 General Information
- 1.1 RADAR Safety
- 1.2 Current IHO Standards / Regulatory Approvals
- 1.3 System Structure and Installation
- 1.4 Basics / Evaluation of the RADAR Video
- 1.4.1 Basics of the Evaluation of RADAR Video in Platinum Series
- 1.4.2 Achievable RADAR Range
- 1.4.3 Distortions of the RADAR Video
- 1.4.4 Undesirable Echo Displays and Effects
- 1.4.5 RADAR Setting for the Display of Racon Codes
- 1.4.6 RADAR Settings for Target Enhancer Detection
- 1.4.7 RADAR Setting for SART Detection (X-Band only)
- 1.4.8 Transmission formats
- 1.5 Basic setting of the RADAR Video
- 1.6 RADAR Accuracy
- 2 The RADAR Keyboard
- 3 An Overview of the Screen
- 4 RADAR Application Area
- 5 RADAR Sidebar - Permanent Area
- 6 RADAR Sidebar - Non-Permanent Area
- 7 Target Handling
- 7.1 Overview
- 7.2 Manual Target Acquisition
- 7.3 Manual Target Selection
- 7.4 Automatic Target Acquisition
- 7.5 Settings for Dangerous Targets
- 7.6 Settings for Acquisition/Guard Zones
- 7.7 Target Fusion
- 7.8 Deletion and Loss of Targets
- 7.9 Critical Target
- 7.10 Target List
- 7.11 Target Display
- 7.12 Trial Manoeuvre
- 7.13 Reference Target Tracking
- 7.14 ARPA Training
- 7.15 ARPA Malfunctions
- 7.16 AIS Malfunctions
- 8 User Symbols
- 9 CHARTRADAR (optional)
- 9.1 Overview
- 9.2 Basic Adjustments
- 9.3 Selecting the Objects to be Displayed in the Vector Chart
- 9.3.1 Overview
- 9.3.2 Categories of Display Groups
- 9.3.3 Select a Category
- 9.3.4 Select the Primary Chart Information Set (PCIS)
- 9.3.5 Indication of Category in the Status Line
- 9.3.6 Defining the Symbol Presentation
- 9.3.7 Setting the Display of Text Labels
- 9.3.8 Switch on Additional Information
- 9.3.9 Switch on Conditionally Displayed Features
- 9.4 CHARTRADAR Application Area
- 9.5 Application Area Context Menu
- 9.6 Setting the Depths Lines to be Displayed in the Vector Chart
- 9.7 Setting the Own Ship’s Draft
- 9.8 Activating the Chart Monitoring
- 9.9 Setting the Look-Ahead Sector
- 9.10 Chart Maintenance
- 9.11 Main Differences between CHARTRADAR and Full ECDISPILOT
- 1 General Information
- VOYAGE PLANNING AND MONITORING
- 1 Voyage Planning
- 1.1 Generation of Routes
- 1.1.1 General Information about Pre-planned Tracks
- 1.1.2 Generation, Handling and Administration of the Routes
- 1.1.3 Route Display Settings
- 1.1.4 Route Editing - Graphical
- 1.1.5 Route Editing - Text Mode
- 1.1.6 Details of the Waypoint Data
- 1.1.7 Checking of Routes
- 1.1.8 Completing the Generation of the Route
- 1.1.9 Import / Export Routes
- 1.1 Generation of Routes
- 2 Chart and Route Monitoring
- 1 Voyage Planning
- CONNING
- SENSORS
- OPTIONAL APPLICATIONS
- MAINTENANCE
- 1 Performance Monitor
- 2 Data Maintenance of the Electronic Charts
- 2.1 General
- 2.2 Starting Chart Maintenance
- 2.3 Chart Maintenance Application Area
- 2.4 Update of Charts from Media
- 2.5 Messages during Chart Update
- 2.6 Display Charts which are on a Media or a MFD (workstation)
- 2.7 Maintenance of Charts on your MFD (workstation)
- 2.8 Display Expander
- 2.9 Backup/Restore of Map Data
- 3 Manual ENC Update Editor
- 4 Hardware Maintenance
- 5 SW Version and Updates
- ALARMS
- LISTS AND INDEXES
- DOCUMENT HISTORY
NACOS Platinum
ED 3100 G 140 / 04 (2011-11)
Operating Instructions
I-3 NACOS Platinum System Description
I General.fm / 10.11.11
I-22
3.1 What is the NACOS Platinum?
The NACOS Platinum is the state-of-the-art integrated Navigation-Automation-Control-System from
SAM Electronics. It consists of separate applications which form the desired specific system installed on
a ship. In an installation, the set of applications may range from a stand-alone RADAR installation to a
full-featured comprehensive installation.
The NACOS Platinum design is the result of the efforts of a multidisciplinary usability team consisting of
specialists from SAM Electronics, Chalmers University (Gothenburg, Sweden) and TNO Human Factors
(Soesterberg, The Netherlands). In addition to high quality and reliability of the cost-effective solution,
the main focus of the NACOS Platinum is on usability, modularity and scalability, ease of installation,
commissioning and servicing, as well as integration with third-party systems.
NACOS Platinum products serve a large variety of possible installations in a professional shipborne envi-
ronment ranging from stand-alone RADAR installations meeting the minimum requirements aboard up to
complex installations on a large ship including RADAR, ECDIS, Route Planning, Conning, Machinery and
various other applications to navigate the ship safely, and reliably to monitor and control the processes
aboard.
The applications of the NACOS Platinum are operated using standardised workstations. The workstations
will be called Multi Functional Display (MFD) further on. See chapter I - 4 on page 27. MFDs are the
standardised operating consoles used as MMI to the NACOS Platinum. They are based on PCs running
under Windows 7. From a MFD, you will have access to the applications installed in your NACOS Platinum
so that the workplaces aboard are standardised. All applications can be made available at any MFD. See
chapter I - 3.2 on page 23.
Fig. I / 1 MFD console design
The full suite of NACOS Platinum applications and possibly integrated third-party products provide the
user with the required information and control functions and thus essentially support the user in
performing the assigned tasks both in everyday routines and in difficult situations or in case of problems.
The vast amount of information resulting from the ship's operation is always presented in a well-struc-
tured and concise manner so that users will have a clear overview of the ship's situation at all times.