User's Manual
Table Of Contents
- GENERAL
- 1 About these Operating Instructions
- 2 Safety Precautions
- 3 NACOS Platinum System Description
- 4 Multi Function Display
- 5 NACOS Platinum Graphical User Interface
- QUICK START GUIDE
- MAIN APPLICATIONS
- RADAR
- 1 General Information
- 1.1 RADAR Safety
- 1.2 Current IHO Standards / Regulatory Approvals
- 1.3 System Structure and Installation
- 1.4 Basics / Evaluation of the RADAR Video
- 1.4.1 Basics of the Evaluation of RADAR Video in Platinum Series
- 1.4.2 Achievable RADAR Range
- 1.4.3 Distortions of the RADAR Video
- 1.4.4 Undesirable Echo Displays and Effects
- 1.4.5 RADAR Setting for the Display of Racon Codes
- 1.4.6 RADAR Settings for Target Enhancer Detection
- 1.4.7 RADAR Setting for SART Detection (X-Band only)
- 1.4.8 Transmission formats
- 1.5 Basic setting of the RADAR Video
- 1.6 RADAR Accuracy
- 2 The RADAR Keyboard
- 3 An Overview of the Screen
- 4 RADAR Application Area
- 5 RADAR Sidebar - Permanent Area
- 6 RADAR Sidebar - Non-Permanent Area
- 7 Target Handling
- 7.1 Overview
- 7.2 Manual Target Acquisition
- 7.3 Manual Target Selection
- 7.4 Automatic Target Acquisition
- 7.5 Settings for Dangerous Targets
- 7.6 Settings for Acquisition/Guard Zones
- 7.7 Target Fusion
- 7.8 Deletion and Loss of Targets
- 7.9 Critical Target
- 7.10 Target List
- 7.11 Target Display
- 7.12 Trial Manoeuvre
- 7.13 Reference Target Tracking
- 7.14 ARPA Training
- 7.15 ARPA Malfunctions
- 7.16 AIS Malfunctions
- 8 User Symbols
- 9 CHARTRADAR (optional)
- 9.1 Overview
- 9.2 Basic Adjustments
- 9.3 Selecting the Objects to be Displayed in the Vector Chart
- 9.3.1 Overview
- 9.3.2 Categories of Display Groups
- 9.3.3 Select a Category
- 9.3.4 Select the Primary Chart Information Set (PCIS)
- 9.3.5 Indication of Category in the Status Line
- 9.3.6 Defining the Symbol Presentation
- 9.3.7 Setting the Display of Text Labels
- 9.3.8 Switch on Additional Information
- 9.3.9 Switch on Conditionally Displayed Features
- 9.4 CHARTRADAR Application Area
- 9.5 Application Area Context Menu
- 9.6 Setting the Depths Lines to be Displayed in the Vector Chart
- 9.7 Setting the Own Ship’s Draft
- 9.8 Activating the Chart Monitoring
- 9.9 Setting the Look-Ahead Sector
- 9.10 Chart Maintenance
- 9.11 Main Differences between CHARTRADAR and Full ECDISPILOT
- 1 General Information
- VOYAGE PLANNING AND MONITORING
- 1 Voyage Planning
- 1.1 Generation of Routes
- 1.1.1 General Information about Pre-planned Tracks
- 1.1.2 Generation, Handling and Administration of the Routes
- 1.1.3 Route Display Settings
- 1.1.4 Route Editing - Graphical
- 1.1.5 Route Editing - Text Mode
- 1.1.6 Details of the Waypoint Data
- 1.1.7 Checking of Routes
- 1.1.8 Completing the Generation of the Route
- 1.1.9 Import / Export Routes
- 1.1 Generation of Routes
- 2 Chart and Route Monitoring
- 1 Voyage Planning
- CONNING
- SENSORS
- OPTIONAL APPLICATIONS
- MAINTENANCE
- 1 Performance Monitor
- 2 Data Maintenance of the Electronic Charts
- 2.1 General
- 2.2 Starting Chart Maintenance
- 2.3 Chart Maintenance Application Area
- 2.4 Update of Charts from Media
- 2.5 Messages during Chart Update
- 2.6 Display Charts which are on a Media or a MFD (workstation)
- 2.7 Maintenance of Charts on your MFD (workstation)
- 2.8 Display Expander
- 2.9 Backup/Restore of Map Data
- 3 Manual ENC Update Editor
- 4 Hardware Maintenance
- 5 SW Version and Updates
- ALARMS
- LISTS AND INDEXES
- DOCUMENT HISTORY
ED 3100 G 140 / 04 (2011-11)
Operating Instructions
H-1 Performance Monitor
H MAINTENANCE.fm / 10.11.11
H-3
NACOS Platinum
1 Performance Monitor
Note:
The Performance Monitor is only present in systems with Radar Platinum.
Background
The performance monitor provides the operator with a simple go/no-go tool to check the transmitter
performance as well as the receiver sensitivity in one step. It comprises a small test oscillator and a
microwave diode with amplifier. Both modules are installed under a hole in the gearbox. The hole is
hermetically sealed with a transparent plastic cover.
The diode receives the radar pulse which is transmitted by the magnetron via waveguide and scanner
into the air. The received signal is amplified and gives an indication about the function of the complete
transmitter path.
The test oscillator transmits a pulse at about 1 msec after the main pulse. This pulse lies outside the
display space and is not visible in the radar image. It simulates a target being far away. This signal is
picked up by the scanner and gives an indication of the proper function of the complete receiving path.
Test
The selected transceiver´s performance can only be
tested by the MFD which is selected as Master for it. If
Master is not selected, the Adjust control will be insen-
sitive. Click the Transceiver Adjust control, the corre-
sponding submenu will open. Check the control for
Performance Monitor. Wait for a minute, the result
will be shown as follows:
- If the sum of both indications from TX and RX path
together is ok, the test is shown with an Ok in the
Transceiver Adjust box.
- If the sum of both indications from TX and RX path
is degraded, the test is shown with a Critical result.
- If the sum of both indications from TX and RX path
is degraded by more than 10 dB, the test is shown
with a Most Critical result.
Switch off the performance monitor by closing the Transmitter Adjust box.
During the test, the radar is fixed to 12 nm and cannot be switched to another range. Do
not start the performance test with a cold transceiver, wait 30 min after switching-on. The
test result could be disturbed by heavy snowfall or rain, shading the hole in the gearbox.
The test result could also be disturbed by other transceivers on-board. They should be
switched off.
If "Most Critical" is shown as the result, this means that the performance quality
of the radar system is no longer adequate for safe radar operation. Request
service!