User's Manual

ED 3100 G 140 / 04 (2011-11)
Operating Instructions
H-3 Manual ENC Update Editor
H MAINTENANCE.fm / 10.11.11
H-17
NACOS Platinum
Click on Session Setup in the Update expander and
enter the Manual ENC Update Session Data. Then,
click on Set. A click on Clear will erase all entered data,
Cancel will close the window without any further action.
In the editor window the entries for the categories of
objects which can be edited are now active.
A click on View Cell will display the chosen cell with
maximum size, so that editing is as easy as possible.
Whenever the display of the cell has been resized or
shifted, a click on View Cell will display the cell again
with maximum size.
A new object can be placed now or existing objects can
be modified. This works in the same way as the usage of
User Symbols. See chapter A - 8 on page A-83 for
details. The update session can be ended clicking on
Quit.
All actions are stored in the session log, as long as the
session has not been ended by a click on Save and Exit. Once an update action has been carried out,
the control Quit changes its name to Undo and Abort. Using this control will lead to abortion of the
update process without changes.
If the operatior activates another application like RADAR or ECDIS while the manual ENC update is done,
the performed actions of the manual update do not get lost, in fact, all alterations will still be present
when the operator returns to the manual update editor.
To view the session log, click on Show Session Log.