Operation and programming manual

ER-260/265 Electronic Cash Register AU Operating Instructions • 41
Check Cashing
Check cashing means exchanging cash for a check. Normally, this function is not allowed. If you
wish to allow check cashing, you must set system option #15 to a value of 1. See “System Option
Programming”.
_ ___THANK_YOU
___CALL_AGAIN
_______< CHECK CASHING >
CHECK $20.00
CASH -20.00
16:52 03-01-2006
000040 00
1. Enter the amount of the check tendered by the
customer.
For example, for $20.00 enter:
0 0 0 2
2. Press CHECK:
CHECK
3. The display will indicate “C” for change, the
drawer will open and the receipt will print as in
the example on the right.
Split Tender
Split tendering means paying for one sale by different payment methods. For example, a $20.00 sale
could be split so $10.00 is paid in cash, and the remaining $10.00 is charged. If necessary, you can
make several different payments.
NOTE: If a portion of a sale is to be charged, the charge payment must be entered last.
_ ___THANK_YOU
___CALL_AGAIN
DEPT.2____________T1 $20.00
SUBTOTAL $20.00
ROUND $0.00
GST AMOUNT $1.82
TOTAL $20.00
CASH $10.00
TOTAL $10.00
CHARGE $10.00
16:52 03-01-2006
000041 00
1. Register the items you wish to sell.
2. Enter the amount of cash tendered by the
customer.
For example, enter $10.00 and press
CASH/TEND:
CASH/
TEND
0 0 1 0
3. The display will indicate “=” and $10.00,
indicating the amount still due. The drawer will
not open. Press CHARGE to charge the
remaining amount:
CHARGE
4. The display will indicate “=” for total, the drawer
will open and the receipt will print as in the
example on the right.