Specifications

108 • Programming Samsung ER 5100/5140 Electronic Cash Register
System Option Programming
Refer to the “System Option Table” on page 109 to review the system options. Read each option
carefully to determine if you wish to make any changes.
NOTE: Because after clearing memory all options settings are automatically set to 0, and
because your most likely option selections require a status setting of 0, you do not need to
program this section unless you wish to change the default status.
Programming a System Option:
1. Turn the control lock to the P position.
2. Enter 3 0, press the SBTL key.
3. Enter a system option address, press the X/TIME key.
4. Enter the number representing the status you have selected, or if there is more than
one decision to be made in an address, add the values representing your choices for
each decision and enter the sum. Press the SBTL key.
5. Repeat from step 3 for each system option you wish to change.
6. Press the CASH key to end system option programming.
System Option Flowchart
SBTLX/TIME
Status
CASH
Repeat for each
System Option
Option #
SBTL03