37˝ Bluetooth Sound bar with Wireless Subwoofer User’s Guide for SR215W For the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.
Safety Instructions & Warnings CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE D' ÉLECTROCUTION NE PAS OUVRIR Warning: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
FCC Warnings Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents Setup Features & Specifications - 5 Includes - 5 Power - 5 Remote batteries - 5 Orientation Rear View - 6 Front View - 6 Source Mode Indicator LED - 6 Speaker Controls (Side) - 6 Subwoofer Connecting the Wireless Subwoofer - 7 Remote Functions & Controls - 8 Remote Battery - 8 Connecting Devices Initial Bluetooth Connection and Playing Audio - 9 Previously Connected Devices - 9 Troubleshooting - 9 Line In - 9 Stereo RCA Inputs (Aux In) - 10 Optical Input - 11 Company Information Conta
Setup Features & Specifications Includes • 37" length • Remote control with 2 AAA batteries • Supports Bluetooth 5.0, range: 60 ft. • Optical audio cable • 2.1 channel stereo sound • AC/DC power adapter for sound bar and subwoofer • Digital volume control • Wall-mount hardware and instructions • Full-function remote • Optical audio input • Line In (3.
Orientation Rear View Wall Mount Pegs DC IN L AUX IN R OPTICAL IN Speaker Inputs: Stereo RCA Inputs | Optical Audio Input | DC Power Input Front View Function/Source Indicators: Power | Line In | Optical | RCA/Aux In | Bluetooth Remote Receiver Source Mode Indicator LED Status Indicator Light Power Off Red Light Bluetooth Standby/Pairing Slow/Quick Flashing Blue Light Bluetooth Connected Solid Blue Light Optical Mode Orange Light Aux In (RCA) Mode White Light Line In Mode Green Light Speak
Subwoofer Connecting the Wireless Subwoofer 1. Power ON the subwoofer while the sound bar is ON. The subwoofer will now automatically begin connecting to the sound bar. 2. When the subwoofer has connected to the sound bar the Connect LED indicator will turn solid blue. When audio is played through any source, the speaker will automatically use the connected subwoofer. 3. If the connection has failed or is lost, the indicator will turn off.
Remote Functions & Controls Power Press to turn the unit on or off. Press to switch to Bluetooth Mode. Optical Press to switch to Optical mode. AUX Press to switch to Aux In mode. Mute Press to mute the volume. The indicator on the sound bar will flash. Bass Press to adjust the bass up or down. Treble Press to adjust the treble up or down. Line In Press to switch to Aux In mode. Skip In Bluetooth mode, press to skip forward or back one track.
Connecting Devices Initial Bluetooth Connection and Playing Audio 1. Power ON the sound bar by pressing the Power button. A voice will say, “Bluetooth,” and the LED indicator will slowly flash blue. When pairing, remain within 3 feet of the Bluetooth device. 2. Using the controls on your Bluetooth device, select ITBSW399 in the Bluetooth Settings to pair. If need be, refer to the user’s manual for your specific device for more information. 3.
Connecting Devices Stereo RCA Inputs (Aux In) Requires RCA stereo audio cable (not included). When connecting RCA stereo audio plugs (Red/White), match them to their corresponding color coded ports. 1. Connect an RCA stereo audio cable to the Aux In ports on the sound bar and the RCA audio outputs on a television or other audio source. 2. Power ON the sound bar and press Source on the sound bar or Aux In on the remote to select Aux In Mode.
Optical Input Requires an audio source with an Optical Audio Output and a Digital Optical Audio Cable (included). 1. Using a Digital Optical Audio Cable, connect the Optical Input on the sound bar to the Optical Output on your audio source (TV, amplifier, etc.). 2. Power ON the sound bar and press Optical on the remote or Source on the sound bar to select Optical Mode. A voice will announce the source mode and the indicator will turn orange. 3. On the connected audio source (TV, amplifier, etc.
Company Information Contact Information Warranty Website: www.iLiveElectronics.com For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.
