Product manual

Installation
13
Figure 8 Space specification
Figure 9 Incorrect installation
max 15
30cm 30cm
30cm 30cm
So lar Ri ve r
Normal Fault
OKESC
● Prone to be damaged by water.
● Close to corrosive gas or liquid (for example, locations where chemicals are processed or around livestock).
● Exposed to direct sunlight.
● Prone to be flooded or covered by snow.
● Little or no air flow.
● Exposed to steam, vapor, or water.
● Exposed to direct cool air.
● Near the television antenna or antenna cable.
The inverter is needed at least 30 cm (see figure 8) clearance. The system may malfunction if not installed
properly, is water damaged, or overheats.
Faults caused by any of the above conditions are not covered by the warranty.
Choose inverter installation position:
● Inverter must be installed on a solid surface which bears the weight of the inverter;
● Tilted degree should not exceed 15 degree, as figure 9:
● Terminals of inverter must be face down;
● Can not be installed horizontally.