Product manual

Run the Inverter & Operation
23
Table 4 LED statutes
End commission
Press OK to confirm
Current Country:
Germany
Press OK to Start running
Press ESC to Back
LED
green
red
Flash
Wait state
Fault state
Light
Normal state
Permanent state
Figure 18 HMI interface
So larR i ver
ESC OK
Home
2012-03-03 10 00 00
: :
Press Esc to Main Menu
Power
Today
Total
0.0 W
0.0 KWh
0.0 KWh
=
~
208.4 V
205.9 V
1.045 kw
49.99 Hz
t
kwh
Green LED
Red LED
Buttons
LCD
7 Operation
7.1 Control and Display Panel
Control and Display Panel of SolarRiver inverter is shown as figure 18.
There are 6 buttons: OK, ESC, UP, DOWN, RIGHT, LEFT.
OK button: confirm the selection.
ESC button: exit current screen or selection
Up button: move cursor to up selection or increase the values
DOWN button: move cursor to down or decrease the values.
RIGHT button: move cursor to right side or increase the backlight.
LEFT button: move cursor to left side or decrease the backlight.
There are two LEDS on the panel. Different LED status means inverter different working statutes.
Step 4: Check settings information
LCD will display the settings information. Please check the settings information. If setting is wrong, please
press the “ESC” to reset. If all the information is correct, please press “OK” to confirm, the inverter will
save all the settings.