Product manual

Communication and Monitoring

Figure 22 Ethernet communication

WAN

Router

8 Communication and Monitoring

8.1 Communication Interface

Standard configuration:

1. Ethernet: Transmit the inverter working state such as output voltage, current, frequency, fault

information to the PC machine or other monitoring system. Ethernet can achieve multi-inverter wired

network at the same time.

Optional configuration:

WIFI: Wireless connect to route. Transmit the inverter working state such as output voltage, current,

frequency, fault information to the PC machine or other monitoring system. WIFI can achieve multi-inverter

wireless network at the same time.

RS485: Achieve multi-inverter network to monitor the inverter working state such as output voltage,

current, frequency, fault information.

8.2 Communication Mode

When user want to know the information of the power system and monitor power system. We offer

following communications.

8.2.1 Ethernet Communication

You can connect inverter to Internet by router (the router is not special for inverters, you can get any

brand in the market). Then you can see the inverter’s data in any place of the world.

Hardware Requirements: computer which support windows(including xp,vista,win7), router, netting

twine, inverter(LAN mode).

Monitor mode: LAN and WAN.

LAN: Install SolarPower Browser in PC which can monitor inverters .In this mode, you can use a router

or nonuse.

If you use a router, you can monitor 254 inverters.

Parameter setting when using router:

Step 1: Enter home interface automatically after startup (If not the home interface, press “ESC” return

to the home interface).

Note!

Only choose one optional configuration when inverter is working.