Product manual

Communication and Monitoring
33
Ethernet
2012-03-03 10 16 40
: :
Confirm?
Auto-IP/DHCP
Manual-IP
Current mode: Auto-IP/DHCP
Ethernet
2012-03-03 10 16 23
: :
Press OK to confirm
Auto-IP/DHCP
Manual-IP
Current mode: Auto-IP/DHCP
Ethernet
2012-03-03 10 22 23
: :
Press OK to confirm
Auto-IP/DHCP
Manud-IP
Current mode: Manual-IP
Step 5: Press "right" or "left" key to move the cursor to select the figure which need to be modified.
Press "up" or "down" key to modify figure. If the password is correct will enter 'Ethernet" interface.
Step 6: Move the cursor to "Auto-IP/DHCP", press "OK" twice. LCD interface will Reboot and then enter
into home interface automatically.
If you don’t use a router, you can only monitor 1 inverter. You will need to use cable to connect inverter
with PC.
Parameter setting when not using router:
Refer to settings when using router:Main Menu->Settings->Network->Ethernet. In "Ethernet" interface
move the cursor to "Manual-IP", press "OK" twice(one press to confirm).