User's Manual

2 VAVN 6500 VAVN 6500 3
Introduction
Thank you for choosing and purchasing this unit.
This instruction manual aims to provide you with installation and operating instructions for the unit.
Features
“Multi-tasking” refers to the simultaneous use of numerous programs or applications on one system.
HIGH RESOULUTION & BRIGHT ACTIVE WIDE TFT LCD with Touch Screen
5 Step Automatic Motorized Viewing Angle
Last Angle Memory
Blue Back Light Control Buttons
Full-Funtion Infrared Remote Control
Max Output Power 50W x 4ch
A/V INPUT , REARVIEW INPUT, A/V OUPUT
Auto Dimmer Control
Multi Screen Aspect ( Normal , Full , Wide )
Picture Adjustable ( Brightness, Contrast, Color, Hue, Sharpness)
NTSC/PAL Auto Selection
DVD/DVD-RW/DVD-R/VCD/CD-R/CD-RW/MP3/JPEG
DVD Last Position Memory
Electronic Anti-Shock
Built-in FM/AM Tuner
Auto Scan Memory(ASM) Store/Preset Scan
FM Frequency : 87.5 - 108Mhz, 12 Memory Preset(FM1/FM2)
AM Frequency : 530Khz - 1720Khz , 6 Memory Preset(AM)
Bulit-in Bluetooth for Bluetooth Enabled Device (Celluar Phone)
IPOD Port
Tell Mute Funtion
This instruction manual is only for reference.
Modifying rights are reserved.
Modifications are subject to change without notice.
NOTE
Safety Precautions
To prevent injury or re, take the following precautions:
To prevent a short circuit, never put or lnsert any metallic objects (such as coins or metal tools)
inside the unit.
Do not touch the liquid crystal uid if the LCD is damaged or broken due to shock.
The liquid crystal uid may be dangerous to your health or even fatal.
If the liquid crystal uid from the LCD contacts your body or clothing, wash it off with soap immediately.
Do not watch Video or operate the unit while driving.
It may cause a car accident because of the distraction.
To enjoy Video Pictures, nd a safe place to park, and engage the parking brake.
This unit is a Class 1 laser product. To prevent direct exposure to laser system, do not open the unit.
The laser beam may hurt your eyes.
Note that TFT LCD is very fragile and could be easily damaged. Do not press or scratch the surface.
Keep away the liquid from the main body to avoid possible electric shock or damage.
Do not attempt to service this product by yourself.
(Don’t repair this unit by yourself to avoid serious damage)
In case of smoking or malfunction from the monitor, power off this unit immediately and contact
dealer for service.
It is the responsibility of the purchaser and installer to comply with all applicable laws and regulations
governing the installation and use of this unit.
Manufacturer disclaims all liability for any property damage or personal injury that may result from
improper or unintended installation or use of this unit.
To prevent damage to the unit, take the following precautions.
Make sure to ground the unit to a negative 12V power supply.
Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or Moisture.
To prevent deterioration, do not touch the terminals of the unit or faceplate with your ngers.
Do not subject the faceplate to excessive shock, as it is a piece of precision Components.
Don’t watch Video pictures while the car’s engine is off. (It may drain the battery)
When replacing a fuse, only use a new fuse with prescribed rating. Using a fuse with the wrong
rating may cause your unit to malfunction.
Use only the screws provided. If you use the wrong screws, you could damage the unit.
You cannot view video pictures while the vehicle is moving.
To enjoy TV/video pictures, nd a safe place to park and engage the parking brake.
Loading and Replacing the remote battery
1 Use two “AAA” size batteries.
Slide the cover while pressing downwards to
remove it as illustrated.
2 Insert the batteries with the + and - poles aligned
properly, following the illustration inside the case.