Product Manual

30 | SAMLEX AMERICA INC. SAMLEX AMERICA INC. | 31
SECTION 3 | Installation
3.3 MOUNTING OF THE UNIT
In order to meet the regulatory safety requirements, the mounting has to satisfy the following
requirements:
•
Mount on a non-combustible material
•
The mounting surface should be able to support a weight of at least 60 Kg / 132 lbs.
Use 4 pcs of 1/4" or M6 mounting bolts and lock washers
Cooling: The unit has openings on the front and back for cooling and ventilation. Ensure that
these openings are not blocked or restricted. Install in cool, dry and well ventilated area.
!
CAUTION!
Ensure there is OVER 200 mm clear space surrounding the inverter for
ventilation.
!
ATTENTION!
Assurer qu’il y a PLUS QUE 200 mm d’espace DÉGAGÉ entourant l’onduleur pour faciliter la ventilation.
Mounting Orientation:
•
Mounting Arrangement 1:
Mount horizontally on a horizontal surface (e.g. table top or a shelf). Please see Fig. 3.2.
Fig 3.2 Mounting Arrangement No.1: Horizontally On Horizontal Surface