Product Manual

64 | SAMLEX AMERICA INC.
LEGEND for Fig 3.13
NOTE:
For sizing of wiring and fuses, refer to the following:
(a) DC side wiring: T
able 3.1
(b) AC side wiring: Table 3.2 for AC input and Table 3.3 for AC output.
L.
Line T
erminal
L-B. Line Bus Bar
N. Neutral Terminal
N-G.
Neutral to Gr
ound Bond
N-B. Neutral Bus Bar
G-B. Grounding Bus Bar
SBJ.
System Bounding Jumper
J1, 2, 4, 7, 9
Male Tab Terminals on internal Circuit Board
RY2. Relay for Neutral to Ground Bond Switching (Section 4.4.2)
BCTS.
Battery Charger T
emperature Sensor EVO-BCTS [Fig 2.5(a)]
1.
Battery Positive Input Connector (1, Figs 2.1 / 3.8)
2.
Battery Negative Input Connector (2, Figs 2.1 / 3.8)
3. Positive Input Connector for External Charge Controller (3, Figs 2.1 / 3.8)
4.
Negative Input Connector for Exter
nal Charge Controller (4, Figs 2.1 / 3.8)
5.
DC Side Grounding Terminal on EVO
TM
(5, Fig 2.1)
6.
RJ-45 Jack for T
emperature Sensor (6, Fig 2.1)
GE.
Gr
ounding Electrode. Also called "Ground Rod"
20. AC Input / Output Terminal Block
21. INPUT L
22.
INPUT N
23.
INPUT GND
24. OUTPUT L
25. OUTPUT N
26. OUTPUT GND
27. Quick Disconnect to disconnect Neutral to Ground bond
Circuit breaker
Fuse
120 V
AC Leg, Phase A
120 V
AC Leg, Phase B (180° out of phase with Phase A Leg)
WARNING!
In case a Generator is used to feed AC input, please ensure that the Neutral conduc-
tor of the Generator is bonded to the chassis / frame of the Generator. Please refer to
Section 3.14.2 for details.
MISE EN GARDE!
En cas d'un générateur est utilisé pour envoyer de l'entrée CA, veuillez vous assurer que le conducteur neutre de la
génératrice est collé sur le châssis / cadre de la génératrice. Veuillez vous reporter à la section 3.14.2 pour plus de détails
SECTION 3 | Installation
B
A
Refer to AC Input / Output
Connections for EVO-1212F-HW
/ 1224F-HW at Fig 3.9.2(a)